Daily Papers

Real-world video benchmarks provide broad coverage, but their fixed clips entangle event count, rate, duration, and visual complexity, making failure modes hard to isolate. While existing programmatic benchmarks offer better control, they score only the final answer rather than auditing reported events against executable ground truth. To bridge this gap, we introduce trace-grounded parametric profiling for event counting in three controlled video tasks: bouncing-ball wall contacts, visual blinks, and categorical state transitions. Across 2,190 videos, we vary event count N and frequency F while holding rendering fixed. Each video includes an executable event trace for capability-surface estimation and timestamp-level evaluation. Our results reveal a staged temporal failure. At an 80% reliability threshold, Gemini 3.6 Flash reliably counts persistent state transitions up to 12 events at 0.5 and 1.0 Hz, yet demonstrates no reliable positive-count region for transient blinking events. Thus, event representation dictates whether a model initially accesses evidence -- a limitation that compounds as count and frequency increase. In the high-count, high-frequency regime, only 0.2% of final counts are correct and the model recovers just 18.1% of true events. To test if visual access is the primary bottleneck, we increase sampling rate. Although this boosts Bounce Ball accuracy from 19.6% to 29.3%, the reported sequence agrees with ground truth only 3.7% of the time. Extra frames can therefore inflate final scores without producing faithful event recovery. Different prompting strategies yield similarly limited gains, and real-world video evaluations show the same concentration of success at low event counts. Ultimately, trace-grounded profiling shifts video evaluation from aggregate accuracy metrics to a detailed diagnostic of where temporal reasoning fails.

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, code-check records, and a final report. Evaluations centered on question answering or script generation rarely verify this complete evidence chain and may therefore reward fluent outputs even when the underlying engineering workflow is incomplete, internally inconsistent, or non-executable. To address this limitation, we present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends. We also introduce StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflow execution, interactive robustness, and multimodal structural-model reconstruction. A scenario succeeds only when all required artifact- and execution-level assertions pass in a single run. Across ten agent-model configurations, each evaluated on the same 50 standard cases, the average Success Rate rises from 56.8% with the generic-skill baseline to 88.6% with the full automatic workflow. The interactive and multimodal evaluations identify two prominent remaining challenges: safe handling of invalid numerical inputs and fixture-consistent reconstruction of structural models. These findings show that artifact-centered evaluation can expose workflow-level failures that are difficult to identify from final responses alone, providing a more rigorous basis for evaluating and improving structural-engineering agents. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

Current end-to-end autonomous driving systems predominantly rely on frame-based sensors, which suffer from inherent perception latency and motion blur during highly dynamic encounters, specifically sudden pedestrian crossings. To address this critical safety vulnerability, we propose DeepIPCv3, a novel multi-modal autonomous navigation framework that synergizes the dense 3D spatial geometry of LiDAR point clouds with the microsecond-level asynchronous event streams of a Dynamic Vision Sensor (DVS). We introduce a Transformer-inspired cross-modal attention mechanism to dynamically correlate these distinct modalities, allowing the network to instantaneously prioritize high-speed dynamic updates without sacrificing structural scene awareness. The fused latent representations are then mapped to safe local waypoints and executable control commands via a hybrid policy network that blends heuristic trajectory tracking with direct neural predictions. Due to the severe physical risks associated with live testing of these sudden crossing scenarios, the framework is rigorously evaluated offline using a custom multi-modal dataset collected across both well-illuminated noon and challenging evening conditions. Extensive comparative and ablation studies demonstrate that DeepIPCv3 achieves state-of-the-art predictive performance. By effectively eliminating exposure failures and motion blur, the proposed LiDAR and DVS fusion yields the lowest trajectory and control command errors, enabling highly reactive, mathematically bounded evasive maneuvers regardless of ambient illumination. To support future research, we will release the codes to our GitHub repo at https://github.com/oskarnatan/DeepIPCv3.

Recent VLM and VLA systems have improved robotic perception and action prediction, yet long-horizon embodied agents still require a general runtime layer for reasoning, memory, tool use, verification, and cross-embodiment execution. We present ABot-AgentOS, a general robotic Agent Operating System that sits above low-level controllers and provides a deliberative agent layer for scene-conditioned planning, context-isolated skill execution, multi-stage verification, multi-modal memory, and edge-cloud collaboration. To evaluate such systems, we introduce EmbodiedWorldBench, an executable benchmark with 16 indoor, outdoor, and hybrid scenes, four difficulty levels, and over 200 tasks involving navigation, object search, NPC dialogue, dynamic events, and trace-grounded scoring. ABot-AgentOS further introduces Universal Multi-modal Graph Memory, a persistent source-grounded substrate that converts dialogue, visual observations, spatial context, temporal relations, and task traces into typed nodes and edges. A failure-driven self-evolution loop converts diagnosed memory failures into gated runtime evo-assets that are promoted only to later evaluation splits, preventing current-split ground-truth leakage while enabling continual improvement. On an initial EmbodiedWorldBench subset, ABot-AgentOS improves over a single-controller baseline in both task success and goal completion. Across memory benchmarks, ABot-AgentOS Static achieves 87.5 on LoCoMo, 59.9 on OpenEQA EM-EQA, 88.6 on Mem-Gallery, and 76.5 Acc@All on NExT-QA; self-evolution further improves LoCoMo to 88.7, OpenEQA to 60.4, and Mem-Gallery to 89.0. These results suggest that a general Agent OS layer can improve long-horizon embodied execution while providing persistent, auditable memory for continual interaction.

Code agents are advancing rapidly, but debugging them is becoming increasingly difficult. As frameworks orchestrate parallel tool calls and multi-stage workflows over complex tasks, making the agent's state transitions and error propagation hard to observe. In these runs, an early misstep can trap the agent in unproductive loops or even cascade into fundamental errors, forming hidden error chains that make it hard to tell when the agent goes off track and why. Existing agent tracing analyses either focus on simple interaction or rely on small-scale manual inspection, which limits their scalability and usefulness for real coding workflows. We present CodeTracer, a tracing architecture that parses heterogeneous run artifacts through evolving extractors, reconstructs the full state transition history as a hierarchical trace tree with persistent memory, and performs failure onset localization to pinpoint the failure origin and its downstream chain. To enable systematic evaluation, we construct CodeTraceBench from a large collection of executed trajectories generated by four widely used code agent frameworks on diverse code tasks (e.g., bug fixing, refactoring, and terminal interaction), with supervision at both the stage and step levels for failure localization. Experiments show that CodeTracer substantially outperforms direct prompting and lightweight baselines, and that replaying its diagnostic signals consistently recovers originally failed runs under matched budgets. Our code and data are publicly available.

Most existing pre-trained language models for source code focus on learning the static code text, typically augmented with static code structures (abstract syntax tree, dependency graphs, etc.). However, program semantics will not be fully exposed before the real execution. Without an understanding of the program execution, statically pre-trained models fail to comprehensively capture the dynamic code properties, such as the branch coverage and the runtime variable values, and they are consequently less effective at code understanding tasks, such as retrieving semantic clones and detecting software vulnerabilities. To close the gap between the static nature of language models and the dynamic characteristics of programs, we introduce TRACED, an execution-aware pre-training strategy for source code. Specifically, we pre-train code language models with a combination of source code, executable inputs, and corresponding execution traces. Our goal is to teach code models the complicated execution logic during the pre-training, enabling the model to statically estimate the dynamic code properties without repeatedly executing code during task-specific fine-tuning. To illustrate the effectiveness of our proposed approach, we fine-tune and evaluate TRACED on three downstream tasks: static execution estimation, clone retrieval, and vulnerability detection. The empirical results show that TRACED relatively improves the statically pre-trained code models by 12.4% for complete execution path prediction and by 25.2% for runtime variable value predictions. TRACED also significantly outperforms statically pre-trained models in clone retrieval and vulnerability detection across four public benchmarks.

Large language model agents increasingly act through terminals, yet existing surveys disperse terminal-mediated behavior across software engineering, tool use, and computer-use research. We regard terminal agents as systems whose dominant progress-bearing action--observation loop is mediated by terminal command execution, textual feedback, and stateful environment interaction. Using terminal-mediated execution as an organizing lens, this survey establishes workload-level boundaries and connects system architecture, competence acquisition, and evaluation through a seven-dimensional terminal competence profile. Our synthesis shows that realized behavior is jointly shaped by the model, interface, harness, runtime, and environment. Executable trajectories ground learning in action consequences, verification, and recovery, whereas prevailing evaluations emphasize final outcomes and expose process quality, recovery, and governance unevenly. Bounded fixed-condition diagnostics illustrate two implications: benchmark families expose different process signals, and matched system comparisons reveal benchmark-dependent performance and limits of component attribution. These findings motivate explicit reporting of system and runtime conditions, supported by replayable traces and process-level evidence. The framework provides a unified basis for studying terminal-mediated agency across software engineering and emerging application domains.

Many popular programming languages, including C#, Java, and Python, support exceptions. Exceptions are thrown during program execution if an unwanted event happens, e.g., a method is invoked with an illegal argument value. Software developers write exceptional behavior tests (EBTs) to check that their code detects unwanted events and throws appropriate exceptions. Prior research studies have shown the importance of EBTs, but those studies also highlighted that developers put most of their efforts on "happy paths", e.g., paths without unwanted events. To help developers fill the gap, we present the first framework, dubbed exLong, that automatically generates EBTs. exLong is a large language model instruction-tuned from CodeLlama and embeds reasoning about traces that lead to throw statements, conditional expressions that guard throw statements, and non-exceptional behavior tests that execute similar traces. We compare exLong with the state-of-the-art models for test generation (CAT-LM) and one of the strongest foundation models (GPT3.5), as well as with analysis-based tools for test generation (Randoop and EvoSuite). Our results show that exLong outperforms existing models and tools. Furthermore, we contributed several pull requests to open-source projects and 23 EBTs generated by exLong were already accepted.

Agent Skills package reusable instructions and assets for tool-using language-model agents. Progressive loading creates failure boundaries poorly represented by session-, model-, or tool-centric traces: a Skill can be discovered but not activated, activated without instructions, or appear successful without an independently verified outcome. We present Skill Runtime Intelligence, a passive runtime-intelligence system that reconstructs supported Skill-lifecycle stages across heterogeneous harnesses while preserving unsupported stages as unknown. Its Run Panorama separates immutable events, deterministic relations, inferred diagnoses, and controlled outcomes with four evidence grades; optional trace import and OTLP/HTTP export support existing observability deployments. Across six frozen repository profiles, three coding agents, and seven clean or fault-injected conditions, all 126 executions preserve source worktrees and each correlates to exactly one source session. Yet adapters expose three distinct semantics: no Skill runs; complete runs but no failure-like events; or failure-like events in every operational-failure and clean session. In a seven-template diagnostic study, semantic aliases and Panorama localize the same six non-clean boundaries but differ in exact/status behavior; both Raw views emit a failure status on all 18 clean cases, while Panorama emits none. A known-rule graph conforms to 126/126 frozen contracts, whereas a second model completes only 228/378 calls. These observations motivate executable adapter qualification and show that event presence is not boundary fidelity, composite exact scores mask distinct errors, and model explanations must not overwrite deterministic facts.

ETAS is a programming language for agent systems that treats model-backed agents, tool calls, prompts, typed memory, human approvals, policies, and execution traces as semantic program elements rather than library conventions. It separates deterministic computation from agentic nondeterminism and externally visible actions while preserving a direct programming style. We present the core design of ETAS. Its static semantics assigns ordinary types through spec conformance and tracks each computation with two behavioral indices: an escaping effect row and a persistent abstraction of the typed action trace it may request. Specs form a terminating compile-time constraint calculus: type specs provide evidence for polymorphism and resource facts, callable specs constrain function and stage shapes, and trace specs express allow, deny, and temporal constraints. Typing checks requested traces against compiled monitors and emits residual obligations when dynamic resources preclude a complete static proof. The dynamic semantics distinguish requested, handled, denied, and committed events; handlers interpret typed actions without making their requests invisible to authorization or audit. We formalize a core calculus and state preservation, progress, type/effect soundness, handler trace-transparency, and policy safety. We also implement ETAS in Rust with a command-line interface, typed HIR checks, effect and policy diagnostics, handler checks, and trace-aware execution hooks. ETAS provides a programming-language foundation for reasoning about authorization, nondeterminism, recovery, and audit evidence before and during agent execution.

Users rely on execution traces to observe agent behavior, diagnose failures, and ensure accountability. These traces contain rich procedural detail, including tool invocations, intermediate decisions, and error-recovery logic. Yet this detail can expose private procedural skills, allowing downstream methods to recover key formulas, thresholds, and strategies without access to model weights or skill files. To quantify this risk and evaluate protection, we construct CapTraceBench, a benchmark of 75 specialized long-horizon tasks and 154 curated skills across seven domains. We also introduce RedAct https://github.com/XuShuwenn/RedAct, a protected trace release framework that localizes protected key information, rewrites traces while preserving verifier-critical evidence, and embeds behavioral watermarks for downstream provenance analysis. Across representative trace reuse methods, RedAct reduces normalized skill transfer (NST) from 44.7--67.1\% on raw traces to below the no-skill baseline, while preserving audit evidence. Its standalone behavioral watermarks reach 93.6--100.0\% true detection with a false alarm rate of at most 1.9\%. These results frame public agent traces as security interfaces and show that selective redaction can reduce procedural capability leakage without removing audit evidence.

Understanding the dynamic behavior of computer programs during normal working conditions is an important task, which has multiple security benefits such as the development of behavior-based anomaly detection, vulnerability discovery, and patching. Existing works achieved this goal by collecting and analyzing various data including network traffic, system calls, instruction traces, etc. In this paper, we explore the use of a new type of data, performance counters, to analyze the dynamic behavior of programs. Using existing primitives, we develop a tool named perfextract to capture data from different performance counters for a program during its startup time, thus forming multiple time series to represent the dynamic behavior of the program. We analyze the collected data and develop a semi-supervised clustering algorithm that allows us to classify each program using its performance counter time series into a specific group and to identify the intrinsic behavior of that group. We carry out extensive experiments with 18 real-world programs that belong to 4 groups including web browsers, text editors, image viewers, and audio players. The experimental results show that the examined programs can be accurately differentiated based on their performance counter data regardless of whether programs are run in physical or virtual environments.

The executable harness surrounding a GUI model determines how observations are assembled, actions are executed, and verification, recovery, and termination are controlled. Compared with harness optimization for non-GUI agents, automatically optimizing this harness poses three coupled challenges: reconciling model intent with observed visual effects, diagnosing failures under variable execution outcomes, and identifying recurrent failure patterns across tasks and translating them into reusable runtime changes. We introduce GUI-HARVEST, an automatic harness optimizer that enables self-improving GUI agents with frozen backbone models. First, to ground diagnosis in observed action effects, it aligns model outputs and executed actions with before-and-after screenshots, tying findings to specific interface transitions. Second, to account for execution variability, it treats repeated runs of the same task as a joint evidence unit, using within-task comparisons to locate outcome-relevant behavioral differences. Third, it consolidates verified findings across tasks into recurring failure patterns, maps them to bounded source-code edits with predictions recorded before evaluation, and checks the predicted behavioral effects alongside task performance through repeated execution. Experiments on OSWorld-Verified show consistent held-out gains across six general-purpose open, GUI-specialized open, and proprietary backbone models; Qwen3-VL-32B-Instruct gains 12.33 points on the full suite. Frozen-harness transfer improves GPT-5 by 13.87 percentage points on WindowsAgentArena at 50 steps without further optimization. With the same backbone and initial harness, GUI-HARVEST outperforms Self-Harness and Meta-Harness, suggesting that GUI-specific diagnosis and validation help harness improvements generalize to unseen tasks. The code is available at https://github.com/GaryYang12345/GUI-HARVEST.

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

While large language models have made significant strides in code generation, the pass rate of the generated code is bottlenecked on subtle errors, often requiring human intervention to pass tests, especially for complex problems. Existing LLM-based debugging systems treat generated programs as monolithic units, failing to address bugs at multiple levels of granularity, from low-level syntax errors to high-level algorithmic flaws. In this paper, we introduce Multi-Granularity Debugger (MGDebugger), a hierarchical code debugger by isolating, identifying, and resolving bugs at various levels of granularity. MGDebugger decomposes problematic code into a hierarchical tree structure of subfunctions, with each level representing a particular granularity of error. During debugging, it analyzes each subfunction and iteratively resolves bugs in a bottom-up manner. To effectively test each subfunction, we propose an LLM-simulated Python executor, which traces code execution and tracks important variable states to pinpoint errors accurately. Extensive experiments demonstrate that MGDebugger outperforms existing debugging systems, achieving an 18.9% improvement in accuracy over seed generations in HumanEval and a 97.6% repair success rate in HumanEvalFix. Furthermore, MGDebugger effectively fixes bugs across different categories and difficulty levels, demonstrating its robustness and effectiveness.

A fundamental skill among human developers is the ability to understand and reason about program execution. As an example, a programmer can mentally simulate code execution in natural language to debug and repair code (aka. rubber duck debugging). However, large language models (LLMs) of code are typically trained on the surface textual form of programs, thus may lack a semantic understanding of how programs execute at run-time. To address this issue, we propose NExT, a method to teach LLMs to inspect the execution traces of programs (variable states of executed lines) and reason about their run-time behavior through chain-of-thought (CoT) rationales. Specifically, NExT uses self-training to bootstrap a synthetic training set of execution-aware rationales that lead to correct task solutions (e.g., fixed programs) without laborious manual annotation. Experiments on program repair tasks based on MBPP and HumanEval demonstrate that NExT improves the fix rate of a PaLM 2 model, by 26.1% and 14.3% absolute, respectively, with significantly improved rationale quality as verified by automated metrics and human raters. Our model can also generalize to scenarios where program traces are absent at test-time.

Predicting program behavior without execution is an essential and challenging task in software engineering. Traditional models often struggle to capture dynamic dependencies and interactions within code. This paper introduces a novel machine learning-based framework called CodeFlowrepresents, which predicts code coverage and detects runtime errors through Dynamic Dependencies Learning. Utilizing control flow graphs (CFGs), CodeFlowrepresents all possible execution paths and the relationships between different statements, offering a comprehensive understanding of program behavior. It constructs CFGs to depict execution paths and learns vector representations for CFG nodes, capturing static control-flow dependencies. Additionally, it learns dynamic dependencies through execution traces, which reflect the impacts among statements during execution. This approach enables accurate prediction of code coverage and identification of runtime errors. Empirical evaluations show significant improvements in code coverage prediction accuracy and effective localization of runtime errors, surpassing current models.

Code LLMs still struggle with code execution reasoning, especially in smaller models. Existing methods rely on supervised fine-tuning (SFT) with teacher-generated explanations, primarily in two forms: (1) input-output (I/O) prediction chains and (2) natural-language descriptions of execution traces. However, intermediate execution steps cannot be explicitly verified during SFT, so the training objective can reduce to merely matching teacher explanations. Moreover, training data is typically collected without explicit control over task difficulty. We introduce ExecVerify, which goes beyond text imitation by incorporating verifiable white-box rewards derived from execution traces, including next-statement prediction and variable value/type prediction. Our work first builds a dataset with multiple difficulty levels via constraint-based program synthesis. Then, we apply reinforcement learning (RL) to reward correct answers about both intermediate execution steps and final outputs, aligning the training objective with semantic correctness at each execution step. Finally, we adopt a two-stage training pipeline that first enhances execution reasoning and then transfers to code generation. Experiments demonstrate that a 7B model trained with ExecVerify achieves performance comparable to 32B models on code reasoning benchmarks and improves pass@1 by up to 5.9\% on code generation tasks over strong post-training baselines.

Modern software infrastructure increasingly relies on LLM agents for development and maintenance, such as Claude Code and Gemini-cli. However, these AI agents differ fundamentally from traditional deterministic software, posing a significant challenge to conventional monitoring and debugging. This creates a critical semantic gap: existing tools observe either an agent's high-level intent (via LLM prompts) or its low-level actions (e.g., system calls), but cannot correlate these two views. This blindness makes it difficult to distinguish between benign operations, malicious attacks, and costly failures. We introduce AgentSight, an AgentOps observability framework that bridges this semantic gap using a hybrid approach. Our approach, boundary tracing, monitors agents from outside their application code at stable system interfaces using eBPF. AgentSight intercepts TLS-encrypted LLM traffic to extract semantic intent, monitors kernel events to observe system-wide effects, and causally correlates these two streams across process boundaries using a real-time engine and secondary LLM analysis. This instrumentation-free technique is framework-agnostic, resilient to rapid API changes, and incurs less than 3% performance overhead. Our evaluation shows AgentSight detects prompt injection attacks, identifies resource-wasting reasoning loops, and reveals hidden coordination bottlenecks in multi-agent systems. AgentSight is released as an open-source project at https://github.com/agent-sight/agentsight.

A key strength of managed runtimes over hardware is the ability to gain detailed insight into the dynamic execution of programs with instrumentation. Analyses such as code coverage, execution frequency, tracing, and debugging, are all made easier in a virtual setting. As a portable, low-level bytecode, WebAssembly offers inexpensive in-process sandboxing with high performance. Yet to date, Wasm engines have not offered much insight into executing programs, supporting at best bytecode-level stepping and basic source maps, but no instrumentation capabilities. In this paper, we show the first non-intrusive dynamic instrumentation system for WebAssembly in the open-source Wizard Research Engine. Our innovative design offers a flexible, complete hierarchy of instrumentation primitives that support building high-level, complex analyses in terms of low-level, programmable probes. In contrast to emulation or machine code instrumentation, injecting probes at the bytecode level increases expressiveness and vastly simplifies the implementation by reusing the engine's JIT compiler, interpreter, and deoptimization mechanism rather than building new ones. Wizard supports both dynamic instrumentation insertion and removal while providing consistency guarantees, which is key to composing multiple analyses without interference. We detail a fully-featured implementation in a high-performance multi-tier Wasm engine, show novel optimizations specifically designed to minimize instrumentation overhead, and evaluate performance characteristics under load from various analyses. This design is well-suited for production engine adoption as probes can be implemented to have no impact on production performance when not in use.

In Agentic AI, Large Language Models (LLMs) are increasingly used in the orchestration layer to coordinate multiple agents and to interact with external services, retrieval components, and shared memory. In this setting, failures are not limited to incorrect final outputs. They also arise from long-horizon interaction, stochastic decisions, and external side effects (such as API calls, database writes, and message sends). Common failures include non-termination, role drift, propagation of unsupported claims, and attacks via untrusted context or external channels. This paper presents an assurance framework for such Agentic AI systems. Executions are instrumented as Message-Action Traces (MAT) with explicit step and trace contracts. Contracts provide machine-checkable verdicts, localize the first violating step, and support deterministic replay. The framework includes stress testing, formulated as a budgeted counterexample search over bounded perturbations. It also supports structured fault injection at service, retrieval, and memory boundaries to assess containment under realistic operational faults and degraded conditions. Finally, governance is treated as a runtime component, enforcing per-agent capability limits and action mediation (allow, rewrite, block) at the language-to-action boundary. To support comparative evaluations across stochastic seeds, models, and orchestration configurations, the paper defines trace-based metrics for task success, termination reliability, contract compliance, factuality indicators, containment rate, and governance outcome distributions. More broadly, the framework is intended as a common abstraction to support testing and evaluation of multi-agent LLM systems, and to facilitate reproducible comparison across orchestration designs and configurations.

Interactive LLM agents are becoming part of daily work, but they do not reliably become easier to work with over time: a correction remembered in one session may still be violated in the next. We study this gap between preference access and preference compliance. In tasks derived from anonymized real-user friction cases, Mem0 memory still leaves 57.5% of applicable preference checks violated. We introduce Test-time Rule Acquisition and Compiled Enforcement (TRACE), a drop-in skill-layer pipeline for coding-agent runtimes that mines user corrections, rewrites them as atomic rules, and compiles them into runtime checks that must pass before an agent completes future tasks. Unlike runtime checks written ahead of time by developers, TRACE skills come from the user's own chat corrections. We evaluate TRACE with simulated user-in-the-loop experiments on ClawArena coding-agent tasks and MemoryArena-derived memory-intensive tasks. On ClawArena, TRACE reduces held-out preference violation from 100.0% to 37.6% on in-distribution tasks and from 100.0% to 2.0% on out-of-distribution tasks. On MemoryArena-derived tasks, TRACE reduces in-distribution violation from 100.0% to 60.5% while matching or exceeding the strongest memory baseline on task pass. These results suggest that compiling corrections into runtime enforcement can address a repeated-friction failure mode that memory alone does not reliably solve, reducing the need for users to restate the same correction across future sessions. Experiment code is available at https://github.com/YujunZhou/TRACE_exp, and the deployable skill is available at https://github.com/YujunZhou/tellonce.

Streaming video understanding requires models to interpret evidence as it arrives, yet current evaluations often report task scores without specifying when evidence becomes valid, how visual history is maintained, or how responses are triggered. As a result, similar scores may correspond to different workloads, failure modes, and operational behavior. We introduce TRACE (Temporal Audit and Condition-aware Evaluation), a condition-aware benchmark and evaluation framework that makes these factors explicit. TRACE combines temporally audited visual tasks with evidence timing and instruction-dependent trigger annotations, a unified causal Core--Adapter protocol that controls information availability while recording actual history processing and response events, and multidimensional reporting of answer quality, timeliness, response-selection behavior, workload, completion, and reliability. On 1,240 records from 517 videos, we evaluate eight publicly available models or systems in eight configurations. We find that nearly identical QA accuracy can mask substantial differences in completion, answer validity, and generation workload, while proactive performance separates into response quality, response delay, false alarms (responses emitted while no target window is currently valid and a later one remains), and missed target windows. These results show that streaming-video performance should be interpreted as execution-conditioned system behavior rather than a single score. Our benchmark and code can be accessed at https://github.com/om-ai-lab/trace-bench{https://github.com/om-ai-lab/trace-bench}.

Programmable world models separate executable dynamics from visual generation, offering a promising foundation for next-generation game engines. However, their visual adherence to explicit rules and interactions remains insufficiently evaluated. Existing benchmarks assess visual quality, controllability, and instruction or physical adherence, but rarely test fidelity to fine-grained, program-specified world events. We introduce PROWBench, comprising 170 programmatically constructed episodes and 600 proxy videos covering diverse scenes and interactions. PROWBench logs entity states and timestamped events, including those outside the camera's field of view, as replayable world records, from which it renders synchronized views and proxy representations. This enables generated videos to be checked against the observable consequences of program execution. An extensible framework constructs scenes, controls behaviors, and can render each camera view in different representations, such as coarse 3D, and bounding boxes. The benchmark covers first- and third-person perspectives, with synchronized multi-view observations available for a subset of episodes. Grounded in these records, PROWBench evaluates entity control, long-horizon memory, and, with two VLM-based metrics, Logic-Render Alignment and Interaction Success Rate, adherence to the prescribed timeline and the visual realization of timestamped engine-recorded events.

Autonomous LLM agents can pursue hidden malicious objectives through sequences of individually benign actions, making sabotage difficult to detect using standard trajectory-level monitoring. Existing approaches either evaluate complete trajectories in a single pass or partition them into independently scored windows, limiting their ability to connect evidence across temporally distant actions. We propose TRACE, a monitoring framework for long-horizon LLM agent trajectories. TRACE operates through a TIJ (Triage-Inspect-Judge) loop that identifies high-signal regions, performs targeted inspection while maintaining accumulated evidence across reasoning steps, and synthesizes a trajectory-level verdict. We evaluate TRACE on ten task domains from SHADE-Arena against state-of-the-art baselines. TRACE achieves an aggregate F1 of 0.713 and recall of 0.844, with the largest gains on tasks requiring long-range evidence linking.

Large language models (LLMs) are leading significant progress in code generation. Beyond one-pass code generation, recent works further integrate unit tests and program verifiers into LLMs to iteratively refine the generated programs. However, these works consider the generated programs as an indivisible entity, which falls short for LLMs in debugging the programs, especially when the programs contain complex logic flows and data operations. In contrast, when human developers debug programs, they typically set breakpoints and selectively examine runtime execution information. The execution flow and the intermediate variables play a crucial role in the debugging process, yet they are underutilized in the existing literature on code generation. In this study, we introduce Large Language Model Debugger (LDB), a novel debugging framework that enables LLMs to refine their generated programs with the runtime execution information. Specifically, LDB segments the programs into basic blocks and tracks the values of intermediate variables after each block throughout the runtime execution. This allows LLMs to concentrate on simpler code units within the overall execution flow, verify their correctness against the task description block by block, and efficiently pinpoint any potential errors. Experiments demonstrate that LDB consistently enhances the baseline performance by up to 9.8% across the HumanEval, MBPP, and TransCoder benchmarks, archiving new state-of-the-art performance in code debugging for various LLM selections.

Automatically generating formal specifications could reduce the effort needed to improve program correctness, but in practice, this is still challenging. Many developers avoid writing contracts by hand, which limits the use of automated verification tools. Recent large language models (LLMs) can generate specifications from code, but these specifications often fail in terms of verification. The reason is syntax errors, overly strict constraints, or mismatches with program behavior. We present SpecPylot, a Python tool that synthesizes executable specifications for Python programs as icontract annotations and checks them using crosshair's symbolic execution. The tool relies on LLMs to propose candidate contracts and uses crosshair to validate them. When crosshair finds a concrete counterexample, SpecPylot updates only the generated contracts and leaves the program itself untouched. In addition, the tool can produce coverage-driven pytest stubs and keep detailed execution artifacts that are useful during debugging. Overall, the evaluation indicates that SpecPylot is able to generate crosshair-compatible contracts for most programs, but it also highlights the practical limits introduced by bounded symbolic exploration and differences in LLM behavior.

Code executability plays a vital role in software debugging and testing (e.g., detecting runtime exceptions or assertion violations). However, code execution, especially partial or arbitrary code execution, is a non-trivial task due to missing definitions and complex third-party dependencies. To make partial code (such as code snippets posted on the web or code fragments deep inside complex software projects) executable, the existing study has proposed a machine learning model to predict the undefined element types and inject the pre-defined dummy values into execution. However, the performance of their tool is limited due to its simply designed dummy values and the inability to continue learning. In this paper, we design and implement a novel framework, named SelfPiCo (Self Guided Partial Code Executor), to dynamically guide partial code execution by incorporating the open-source LLM (i.e., Code Llama) within an interactive loop. Particularly, SelfPiCo leverages few-shot in-context learning and chain-of-thought reasoning to elicit human knowledge and logical reasoning based on fine-tuning the Code Llama model. SelfPiCo continuously learns from code execution results and refines its predictions step after step. Our evaluations demonstrate that SelfPiCo can execute 72.7% and 83.3% of all lines in the open-source code and Stack Overflow snippets, outperforming the most recent state-of-the-art Lexecutor by 37.9% and 33.5%, respectively. Moreover, SelfPiCo successfully detected 18 and 33 runtime type error issues by executing the partial code from eight GitHub software projects and 43 Stack Overflow posts, demonstrating the practical usage and potential application of our framework in practice.

Executable programs offer explicit control over how images and videos are constructed, but generating runnable code is only the beginning of visual creation. A program can execute correctly while violating the requested composition, appearance, or motion. We define this discrepancy as the Program-to-Visual (P2V) gap and introduce MaLiang-Harness, a unified framework for organizing MLLM-driven visual generation into a persistent process of construction, inspection, and revision. Its central design is to make the evolving visual program, its construction history, and its verification share a common revision reference. We define the Persistent Executable Generation (PEG) state as preserving programs and task context. Traceable Generation Process (TGP) connects edits to rendered evidence, and Revision-aware Editing and Verification (REV) supports restoration and checks the current revision before completion. Together, these mechanisms coordinate planning, execution, and visual feedback across rendering backends. We evaluate 11 powerful closed-source MLLMs on MaLiang-IBench and four on MaLiang-VBench, measuring generation success, visual quality, and computational cost. GPT-6-Astra achieves 100% generation success on both benchmarks, with 96.0% of image tasks and 76.9% of video tasks meeting all quality thresholds. The comparison also reveals a mismatch between general capability scores and visual generation performance, with similarly scored models differing substantially in their ability to satisfy visual requirements. MaLiang-Harness provides a systematic basis for studying how MLLMs translate executable code into visual outcomes, exposing both the potential of programmable generation and the limitations of general benchmarks as predictors of this ability. The project is available at https://github.com/gulucaptain/MaLiang-Harness.

Platform-orchestrated agentic workflows have become a popular paradigm for developing LLM-based applications. However, their reliability remains a major challenge due to the uncertainty of LLM outputs, complex inter-node dependencies, and heterogeneous tool interactions. Existing agentic workflow optimization and agent enhancement methods primarily rely on trajectory-level feedback. Without explicitly identifying the underlying failure root causes, their resulting repair plans are often insufficiently targeted. We propose FlowFixer, a diagnosis-driven automated repair framework for agentic workflows. FlowFixer first transforms workflow executions into unified symbolic traces and performs symbolic inference to derive executable behavioral specifications that capture node correctness, temporal dependencies, and causal relationships. Based on specification verification, it conducts failure attribution and root cause analysis, and then generates targeted repair patches. To reduce verification costs, FlowFixer further employs a multi-dimensional pre-execution assessment to filter infeasible repairs before dynamic verification. We evaluate FlowFixer on workflow failures collected from three popular development platforms: Dify, Coze and n8n. Results show that FlowFixer achieves a repair success rate of 71.3%, outperforming state-of-the-art baselines by 11.9% to 27.6%. It also improves failure attribution accuracy by 4.8% to 33.1% and root cause analysis accuracy by 15.3% to 38.8%. This work offers a new perspective on reliable diagnosis and repair of agentic workflows through symbolic modeling and inference.

Asynchronous monitoring, incident investigations, and compliance audits primarily rely on agent traces to reconstruct what happened. These analyses assume that LLM agents cannot tamper with their own execution traces. We show that local LLM agents such as Claude Code, Codex, Antigravity, Open Code and Grok Build fail to enforce this boundary. All tested harnesses, except Muse Code, allowed agents to delete their traces when asked, without triggering monitor guardrails. We also validate that external attackers can exploit this gap to induce trace deletion. Finally, we show that trace tampering behavior emerges naturally in frontier models, when agents try to improve their rewards. We advise practitioners to ensure trace logging happens through an independent interception mechanism outside of the agent's control, preserving trace integrity even in cases of full host compromise. Overall, our findings identify a concrete failure of trace integrity in agent infrastructure which can be used to conceal misaligned behaviors like scheming or sabotage.

Visual programs are executable code generated by large language models to address visual reasoning problems. They decompose complex questions into multiple reasoning steps and invoke specialized models for each step to solve the problems. However, these programs are prone to logic errors, with our preliminary evaluation showing that 58% of the total errors are caused by program logic errors. Debugging complex visual programs remains a major bottleneck for visual reasoning. To address this, we introduce VDebugger, a novel critic-refiner framework trained to localize and debug visual programs by tracking execution step by step. VDebugger identifies and corrects program errors leveraging detailed execution feedback, improving interpretability and accuracy. The training data is generated through an automated pipeline that injects errors into correct visual programs using a novel mask-best decoding technique. Evaluations on six datasets demonstrate VDebugger's effectiveness, showing performance improvements of up to 3.2% in downstream task accuracy. Further studies show VDebugger's ability to generalize to unseen tasks, bringing a notable improvement of 2.3% on the unseen COVR task. Code, data and models are made publicly available at https://github.com/shirley-wu/vdebugger/

DL compiler's primary function is to translate DNN programs written in high-level DL frameworks such as PyTorch and TensorFlow into portable executables. These executables can then be flexibly executed by the deployed host programs. However, existing DL compilers rely on a tracing mechanism, which involves feeding a runtime input to a neural network program and tracing the program execution paths to generate the computational graph necessary for compilation. Unfortunately, this mechanism falls short when dealing with modern dynamic neural networks (DyNNs) that possess varying computational graphs depending on the inputs. Consequently, conventional DL compilers struggle to accurately compile DyNNs into executable code. To address this limitation, we propose \tool, a general approach that enables any existing DL compiler to successfully compile DyNNs. \tool tackles the dynamic nature of DyNNs by introducing a compilation mechanism that redistributes the control and data flow of the original DNN programs during the compilation process. Specifically, \tool develops program analysis and program transformation techniques to convert a dynamic neural network into multiple sub-neural networks. Each sub-neural network is devoid of conditional statements and is compiled independently. Furthermore, \tool synthesizes a host module that models the control flow of the DyNNs and facilitates the invocation of the sub-neural networks. Our evaluation demonstrates the effectiveness of \tool, achieving a 100\% success rate in compiling all dynamic neural networks. Moreover, the compiled executables generated by \tool exhibit significantly improved performance, running between 1.12times and 20.21times faster than the original DyNNs executed on general-purpose DL frameworks.

Tool-augmented LLM agents raise new security risks: tool executions can introduce runtime-only behaviors, including prompt injection and unintended exposure of external inputs (e.g., environment secrets or local files). While existing scanners often focus on static artifacts, analyzing runtime behavior is challenging because directly executing untrusted tools can itself be dangerous. We present MCP-SandboxScan, a lightweight framework motivated by the Model Context Protocol (MCP) that safely executes untrusted tools inside a WebAssembly/WASI sandbox and produces auditable reports of external-to-sink exposures. Our prototype (i) extracts LLM-relevant sinks from runtime outputs (prompt/messages and structured tool-return fields), (ii) instantiates external-input candidates from environment values, mounted file contents, and output-surfaced HTTP fetch intents, and (iii) links sources to sinks via snippet-based substring matching. Case studies on three representative tools show that MCP-SandboxScan can surface provenance evidence when external inputs appear in prompt/messages or tool-return payloads, and can expose filesystem capability violations as runtime evidence. We further compare against a lightweight static string-signature baseline and use a micro-benchmark to characterize false negatives under transformations and false positives from short-token collisions.

Large language model (LLM)-based coding assistants have made substantial progress, yet most systems remain reactive, requiring developers to explicitly formulate their needs. Proactive coding assistants aim to infer latent developer intent from integrated development environment (IDE) interactions and repository context, thereby reducing interaction overhead and supporting more seamless assistance. However, research in this direction is limited by the scarcity of large-scale real-world developer behavior data. Existing studies therefore often rely on LLM-simulated IDE traces, whose fidelity to real development behavior remains unclear. In this paper, we investigate this simulation-to-reality gap through a large-scale empirical study. We collect real IDE interaction traces from 1{,}246 experienced industry developers over three consecutive days using a custom Visual Studio Code extension, and construct paired LLM-simulated traces for controlled comparison. Our analysis shows that simulated traces differ substantially from real traces in behavioral diversity, temporal structure, and exploratory patterns. Based on the collected data, we introduce ProCodeBench, a real-world benchmark for proactive intent prediction. Experiments with representative LLMs, retrieval-augmented methods, and agentic baselines show that current approaches remain far from reliable under real IDE traces, suggesting that simulation-based evaluation can overestimate real-world performance. Finally, our training study shows that simulated data cannot replace real data, but can complement it when used before real-world fine-tuning. These findings highlight the importance of real developer behavior data for evaluating and training proactive coding assistants.

We address the problem of runtime trajectory anomaly detection, a critical capability for enabling trustworthy LLM agents. Current safety measures predominantly focus on static input/output filtering. However, we argue that ensuring LLM agents reliability requires auditing the intermediate execution process. In this work, we formulate the task of Trajectory Anomaly Detection. The goal is not merely detection, but precise error localization. This capability is essential for enabling efficient rollback-and-retry. To achieve this, we construct TrajBench, a dataset synthesized via a perturb-and-complete strategy to cover diverse procedural anomalies. Using this benchmark, we investigate the capability of models in process supervision. We observe that general-purpose LLMs, even with zero-shot prompting, struggle to identify and localize these anomalies. This reveals that generalized capabilities do not automatically translate to process reliability. To address this, we propose TrajAD, a specialized verifier trained with fine-grained process supervision. Our approach outperforms baselines, demonstrating that specialized supervision is essential for building trustworthy agents.

Memory is essential for enabling large language models to support long-horizon reasoning, yet existing memory systems remain unreliable and difficult to debug. Tracing memory's dynamic evolution is crucial to understand how information is synthesized, propagated, or corrupted over time. In this work, we study the new problem of error tracing and attribution in LLM memory systems. We propose a novel framework that transforms memory pipelines into executable memory evolution graphs, enabling fine-grained tracing of operational information flow. We then construct MemTraceBench, a benchmark collected from representative memory systems such as Long-Context, RAG, Mem0, and EverMemOS, to systematically study memory failure modes. We further introduce an automatic attribution method that iteratively traces operation subgraphs to pinpoint the root cause of any failed case. Our analysis reveals that memory failures are systematic, stemming from operation-level issues like information loss and retrieval misalignment. Crucially, we leverage these fine-grained attribution signals to guide downstream prompt optimization, establishing a closed-loop system that automatically corrects faults and boosts end-task performance by up to 7.62%. Code will be released at https://github.com/zjunlp/MemTrace.

Failure attribution, i.e., identifying the responsible agent and decisive step of a failure, is particularly challenging in LLM-based multi-agent systems (MAS) due to their natural-language reasoning, nondeterministic outputs, and intricate interaction dynamics. A reliable benchmark is therefore essential to guide and evaluate attribution techniques. Yet existing benchmarks rely on partially observable traces that capture only agent outputs, omitting the inputs and context that developers actually use when debugging. We argue that failure attribution should be studied under full execution observability, aligning with real-world developer-facing scenarios where complete traces, rather than only outputs, are accessible for diagnosis. To this end, we introduce TraceElephant, a benchmark designed for failure attribution with full execution traces and reproducible environments. We then systematically evaluate failure attribution techniques across various configurations. Specifically, full traces improve attribution accuracy by up to 76\% over a partial-observation counterpart, confirming that missing inputs obscure many failure causes. TraceElephant provides a foundation for follow-up failure attribution research, promoting evaluation practices that reflect real-world debugging and supporting the development of more transparent MASs.

AI agents are increasingly embedded in real software systems, where they execute multi-step workflows through multi-turn dialogue, tool invocations, and intermediate decisions. These long execution histories, called agentic traces, make validation difficult. Outcome-only benchmarks can miss critical procedural failures, such as incorrect workflow routing, unsafe tool usage, or violations of prompt-specified rules. This paper presents AgentPex, an AI-powered tool designed to systematically evaluate agentic traces. AgentPex extracts behavioral rules from agent prompts and system instructions, then uses these specifications to automatically evaluate traces for compliance. We evaluate AgentPex on 424 traces from τ^2-bench across models in telecom, retail, and airline customer service. Our results show that AgentPex distinguishes agent behavior across models and surfaces specification violations that are not captured by outcome-only scoring. It also provides fine-grained analysis by domain and metric, enabling developers to understand agent strengths and weaknesses at scale. The source code of AgentPex is available at https://github.com/microsoft/agentpex.

Training large language models (LLMs) on Python execution traces grounds them in code execution and enables the line-by-line execution prediction of whole Python programs, effectively turning them into neural interpreters (FAIR CodeGen Team et al., 2025). However, developers rarely execute programs step by step; instead, they use debuggers to stop execution at certain breakpoints and step through relevant portions only while inspecting or modifying program variables. Existing neural interpreter approaches lack such interactive control. To address this limitation, we introduce neural debuggers: language models that emulate traditional debuggers, supporting operations such as stepping into, over, or out of functions, as well as setting breakpoints at specific source lines. We show that neural debuggers -- obtained via fine-tuning large LLMs or pre-training smaller models from scratch -- can reliably model both forward execution (predicting future states and outputs) and inverse execution (inferring prior states or inputs) conditioned on debugger actions. Evaluated on CruxEval, our models achieve strong performance on both output and input prediction tasks, demonstrating robust conditional execution modeling. Our work takes first steps towards future agentic coding systems in which neural debuggers serve as a world model for simulated debugging environments, providing execution feedback or enabling agents to interact with real debugging tools. This capability lays the foundation for more powerful code generation, program understanding, and automated debugging.

Automated vulnerability reproduction from CVE descriptions requires generating executable Proof-of-Concept (PoC) exploits and validating them in target environments. This process is critical in software security research and practice, yet remains time-consuming and demands specialized expertise when performed manually. While LLM agents show promise for automating this task, existing approaches often conflate exploring attack directions with fixing implementation details, which leads to unproductive debugging loops when reproduction fails. To address this, we propose CVE2PoC, an LLM-based dual-loop agent framework following a plan-execute-evaluate paradigm. The Strategic Planner analyzes vulnerability semantics and target code to produce structured attack plans. The Tactical Executor generates PoC code and validates it through progressive verification. The Adaptive Refiner evaluates execution results and routes failures to different loops: the Tactical Loop for code-level refinement, while the Strategic Loop for attack strategy replanning. This dual-loop design enables the framework to escape ineffective debugging by matching remediation to failure type. Evaluation on two benchmarks covering 617 real-world vulnerabilities demonstrates that CVE2PoC achieves 82.9% and 54.3% reproduction success rates on SecBench.js and PatchEval, respectively, outperforming the best baseline by 11.3% and 20.4%. Human evaluation confirms that generated PoCs achieve comparable code quality to human-written exploits in readability and reusability.

Coding agents operate on real repository coding tasks, and persistent memory systems promise to reuse experience across tasks. Yet existing evaluations do not show whether those systems improve executable repository work. Repository benchmarks test code changes but do not isolate memory, while memory benchmarks score recall without measuring downstream coding outcomes. We introduce VibeMemBench, a benchmark for evaluating memory systems on 111 coding targets from 90 SWE-rebench V2 repositories and 3,634 history trajectories from the target repositories. The targets follow the SWE benchmark style and cover bug fixes, feature requests, interface changes, and configuration work. An agent edits each target codebase under a declared memory condition. Executable tests decide task resolution. Each target is retained only when injected history experience improves its executable outcome in a reference setting, so every target carries a prior experience whose usefulness is verified by execution in that setting. The frozen verified experience is then transferred to five held-out solvers. Direct injection raises observed task resolution on four of them by 1.1 to 4.5 percentage points while lowering agent steps on all five. Yet when four existing memory systems must construct and retrieve experience from the same history, eleven of twelve solver and system pairings fail to exceed the matched memory-off baseline. VibeMemBench exposes the gap between the useful experience that repository history holds and the experience existing memory systems deliver for repository coding tasks.

Large Language Model (LLM)-based agentic systems, often comprising multiple models, complex tool invocations, and orchestration protocols, substantially outperform monolithic agents. Yet this very sophistication amplifies their fragility, making them more prone to system failure. Pinpointing the specific agent or step responsible for an error within long execution traces defines the task of agentic system failure attribution. Current state-of-the-art reasoning LLMs, however, remain strikingly inadequate for this challenge, with accuracy generally below 10%. To address this gap, we propose AgenTracer, the first automated framework for annotating failed multi-agent trajectories via counterfactual replay and programmed fault injection, producing the curated dataset TracerTraj. Leveraging this resource, we develop AgenTracer-8B, a lightweight failure tracer trained with multi-granular reinforcement learning, capable of efficiently diagnosing errors in verbose multi-agent interactions. On the Who&When benchmark, AgenTracer-8B outperforms giant proprietary LLMs like Gemini-2.5-Pro and Claude-4-Sonnet by up to 18.18%, setting a new standard in LLM agentic failure attribution. More importantly, AgenTracer-8B delivers actionable feedback to off-the-shelf multi-agent systems like MetaGPT and MaAS with 4.8-14.2% performance gains, empowering self-correcting and self-evolving agentic AI.

Evaluating large language models (LLMs) for instrument control requires methods that go beyond standard, stateless algorithmic benchmarks, since the behavior of physical systems cannot be fully captured by unit tests alone. Here we introduce EnvTrace, a simulation-based method that evaluates execution traces to assess semantic code equivalence. EnvTrace is demonstrated with a beamline control-logic digital twin to facilitate the evaluation of instrument control code, with the digital twin itself also enabling the pre-execution validation of live experiments. Over 30 LLMs were evaluated using trace alignment to generate a multi-faceted score for functional correctness across key behavioral dimensions, showing that many top-tier models can approach human-level performance in rapid control-code generation. This is a first step toward a broader vision where LLMs and digital twins work symbiotically: LLMs providing intuitive control and agentic orchestration, and digital twins offering safe and high-fidelity environments, paving the way towards autonomous embodied AI.

Behavioral Co-Versioning remains absent from mainstream practice: while developers routinely version source code with Git, they rarely persist and query how run-time behavior evolves across revisions. This paper argues that this mismatch contributes to a blind spot in software evolution analysis and CI, where rich execution information is discarded and typically reduced to pass/fail outcomes -- despite partial test oracles, flakiness, and silent output or performance drift. We propose Behavioral Co-Versioning, a paradigm that couples the Git history with a Behavioral Archive: an append-only, queryable store of selected run-time observations (e.g., method I/O and performance signals) collected during test runs and keyed by commit and test context. This enables semantic diffing, behavior-aware regression localization, and retrospective auditing by querying historical executions, complementing proactive, signal-specific monitoring tools. We first outline a minimal data model and change diagnostics based on code/test/behavior fingerprints, and then demonstrate feasibility with a laptop-scale prototype that replays historical commits of a Python project, archives run-time observations in a local Parquet-backed store, and detects behavioral changes not apparent from textual diffs.

Bug validation asks a coding agent to produce an executable witness for a reported bug. The witness combines a concrete input with a testing harness and exposes faulty behavior during execution. Such evidence makes audit findings actionable, yet benchmark evaluation is difficult when cases reuse public historical bugs and witnesses or require manual construction. We present WitnessGym, an automated framework for constructing bug-validation benchmarks through bug injection. It injects bugs into test-reached paths of real projects, rebuilds each project, and retains cases exposed by a construction-time witness. Bug specifications and execution adapters allow extension to additional bug types and languages. Bug-preserving transformations vary the surrounding structure while preserving the witness behavior. Based on real-world Java projects with test suites, WitnessGym automatically constructs 1,300 benchmark cases. The injected patches resemble historical bug patches and are difficult for the two evaluated models to distinguish in blinded comparisons. We evaluate four coding agent frameworks in six framework/model pairings across bug types, execution contexts, and transformation depths. Witness construction remains difficult even when the bug pattern is known. Our framework, benchmark cases, and evaluation scripts are available.

Can one graph represent every kind of LLM agent's run? A trace records what each step did, never what it relied on, the state it read, and the results it reused. GRADE recovers that missing layer: it models any run as one graph over its step nodes with two edge layers, execution edges (what ran in what order) read from the trace for free, and dependency edges (what each step relied on) rarely logged, so each is graded by how it is known, observed, declared, or inferred. One representation, and each layer earns its place. Across six corpora of LLM agents spanning tool use, coding, and the web, the dependency layer can predict failure where run size is weak and, under leave-one-corpus-out transfer, stays above chance on every held-out class while run size fails. Meanwhile, the execution layer localizes the faulting step in a failed multi-agent run. This work also provides a more in-depth analysis of why generic graph neural networks may misread the dependency layer, unlike our feature-based alternative. The same graph representation opens further uses, carrying from failure diagnosis in a single run to efficiency and robustness optimization at scale.

A coding agent can earn a passing grade by fixing its code, or by deleting the test that exposes the bug. Detecting such reward hacking requires recognizing attempted shortcuts, including those that fail. We release 173,561 annotated multi-turn coding trajectories from Qwen3-8B and show that supervising shortcut behavior independently of exploit success substantially improves detection. We introduce HACKTRACE, a behavior-supervised monitor that reads the internal states the agent already computes while generating code. Reusing these states enables monitoring before a turn is complete, without additional language-model tokens or passes. Combining this evidence with static features of the final files achieves a mean per-problem AUC of 0.997 with 8 ms of monitoring overhead, improving both accuracy and latency over monitors that run the model again on an honesty question and answer. The same generation states also provide an inexpensive monitoring signal for reinforcement learning. With strong GRPO penalties, HACKTRACE reduces the cheating share of passing solutions from 82-91% to 1-5%, while retaining honest, correct solutions and maintaining high detection accuracy as the policy evolves. Our results show that both the supervision target and the source of monitoring evidence matter for turning accurate detection into a useful training signal.

Binary decompilation is fundamental to security tasks such as vulnerability discovery, malware inspection, and executable-only program understanding. Recent LLM-based decompilation methods have shown promising results, but most still follow a single-turn generation paradigm: given assembly code or decompiler-produced pseudo-code, the model generates one output and stops. Consequently, the generated code may appear readable or even compile successfully, yet still deviate from the behavior of the original binary and mislead downstream analysis. This paper presents AutoDecompiler, a decompilation-specialized LLM trained with reinforcement learning for feedback-driven multi-turn binary decompilation. Instead of treating decompilation as one-shot code generation, AutoDecompiler formulates it as an iterative refinement process, where the model revises generated code based on compilation, execution, and input/output testing feedback. To enable this process, we design decompilation-specific rewards that capture code validity, recompilability, execution consistency, and semantic fidelity. We further construct stage-aware diagnostic feedback from compiler errors, execution failures, and failed test cases, and introduce progress-aware trajectory rewarding and turn-aware advantage reweighting to encourage beneficial revisions while suppressing regressions. We train the AutoDecompiler family and evaluate it across different input settings, model scales, and benchmarks. Experimental results show that AutoDecompiler consistently outperforms its single-turn counterparts under the same model size and input setting, achieving clear improvements in behavioral re-executability. These results demonstrate that learning to exploit program feedback with reinforcement learning is an effective direction for improving the functional correctness of LLM-based binary decompilation.

Code Executing Reasoning is becoming a new non-functional metric that assesses the ability of large language models (LLMs) in programming tasks. State-of-the-art frameworks (CodeMind or REval) and benchmarks (CruxEval) usually focus on LLM's prediction of a given code's input/output or intermediate variable states/values on limited programs. However, there is no tool for more in-depth analysis of the results. Without such a tool, the observations about LLM's code execution reasoning cannot be generalized to more datasets, preventing the research community and practitioners from devising the next generation of LLMs with better code execution reasoning abilities. This paper introduces ExeRScope, a series of tools and heuristics to analyze the result of code execution reasoning frameworks to understand better the impact of code properties in the studied benchmarks on the code execution reasoning. With such tooling, analysis can be generalized to code with similar properties without the urgent need to design more benchmarks, which is a cumbersome effort.

LLM agents increasingly rely on agent harness: the runtime infrastructure around the base model that defines execution environments, tool interfaces, context, lifecycle orchestration, observability, verification, and governance. Existing self-improving agents and automatic harness evolution methods mainly improve agents through runtime supervision, prompt optimization, workflow search, or harness modification based on final outcomes. However, they often fail to diagnose where the responsible evidence lies in failed trajectories and which harness implementation mechanism causes the unreliable behavior, resulting in broad, indirect, or poorly scoped changes. This paper proposes HarnessFix, a trace-grounded and diagnosis-driven framework for repairing agent harnesses. HarnessFix compiles raw execution traces and harness artifacts into a Harness-aware Trace Intermediate Representation (HTIR), which normalizes fragmented trajectory evidence, captures step-level data-flow and control-flow relations, and aligns runtime steps with the harness artifacts that shape their behavior. It then attributes failures to responsible steps and harness artifacts, and consolidates recurring diagnoses into repair-oriented flaw records. Finally, HarnessFix maps these records to scoped repair operators, generates patches under flaw-specific repair specifications, and accepts them through regression-aware validation. We evaluate HarnessFix on four popular benchmarks, and results show that it improves the performance over the initial harnesses by 6.3% to 18.4%, significantly outperforming human-designed and self-evolution baselines. HarnessFix highlights the value of treating failed trajectories not only as feedback signals, but also as structured evidence for diagnosing and repairing the harness mechanisms behind agent failures.

Reasoning over heterogeneous artifacts (PDFs, spreadsheets, slide decks, etc.) increasingly occurs within structured agent workflows that iteratively extract, transform, and reference external information. In these workflows, uncertainty is not merely an input-quality issue: it can redirect decomposition and routing decisions, reshape intermediate state, and produce qualitatively different execution trajectories. We study this phenomenon by treating uncertainty as a controlled variable: we inject structured perturbations into artifact-derived representations, execute fixed workflows under comprehensive logging, and quantify contamination via trace divergence in plans, tool invocations, and intermediate state. Across 614 paired runs on 32 GAIA tasks with three different language models, we find a decoupling: workflows may diverge substantially yet recover correct answers, or remain structurally similar while producing incorrect outputs. We characterize three manifestation types: silent semantic corruption, behavioral detours with recovery, and combined structural disruption and their control-flow signatures (rerouting, extended execution, early termination). We measure operational costs and characterize why commonly used verification guardrails fail to intercept contamination. We contribute (i) a formal taxonomy of contamination manifestations in structured workflows, (ii) a trace-based measurement framework for detecting and localizing contamination across agent interactions, and (iii) empirical evidence with implications for targeted verification, defensive design, and cost control.

Agentic red-teaming benchmarks report whether an injected agent was compromised as a single bit: the attack succeeded, or it did not. We argue that this binary attack-success rate discards the information a defender most needs, namely how harmful the resulting action was. We introduce an action-graded harm rubric that scores an agent's tool-call trajectory on a seven-level ordinal scale (L0 to L6) according to whether the executed action was reversible, whether it crossed scope to reach another party, and whether it expanded privilege. We compute the scale two ways: a deterministic oracle that reads the trajectory and the attacker's stated goal, and a panel of three frontier language-model judges that read a tag-free account of the same trajectory. Across four victim models and two defenses on the AgentDojo workspace suite, severity grading exposes three cases the binary metric hides, including a defense that reports a zero attack-success rate while still permitting an externally visible cross-scope leak through an unfiltered tool. The judge panel reproduces the oracle with high ordinal agreement (Krippendorff's alpha = 0.91) but shares systematic blind spots that we characterize, most notably a failure to recognize escalation chains. Unlike prior work that provides harm taxonomies, harmful-task completion tests, execution-level safety benchmarks, or severity-aware simulation, our contribution is a reusable, trace-grounded severity instrument applied to the actual actions recorded in existing red-team logs. All code, prompts, and per-episode logs are released.

Tool-augmented LLMs are increasingly deployed as agents that interleave natural-language reasoning with executable Python actions, as in CodeAct-style frameworks. In deployment, these agents rely on runtime state that persists across steps. By contrast, common training pipelines treat agent traces as token sequences, with execution semantics left implicit. This raises a data-centric question: Is state persistence merely an inference-time scaffold, or can models learn to exploit it when training data exposes the corresponding execution semantics? We isolate state persistence as a training-time variable. We introduce Opaque Knapsack, a procedurally generated family of partially observable optimization tasks designed to prevent one-shot solutions. Item attributes and constraints are hidden behind budgeted tool calls, forcing multi-turn control flow and iterative state revision. Holding task instances, prompts, tools, model, and supervision fixed, we generate paired trajectories differing only in whether interpreter state persists across steps or resets after each action. We then fine-tune identical base models (Qwen3-8B) on each trace variant and evaluate all four train-runtime combinations. Our 2x2 cross-evaluation shows that execution semantics primarily affect how agents reach solutions, not whether they do: solution quality is statistically indistinguishable across conditions, but token cost and stability differ substantially. A persistent-trained model in a stateless runtime triggers missing-variable errors in roughly 80% of episodes; a stateless-trained model in a persistent runtime redundantly re-derives retained state, using roughly 3.5x more tokens. Interpreter persistence should be treated as a first-class semantic of agent traces. Aligning fine-tuning data with deployment runtimes improves efficiency and reduces brittle train-runtime mismatches.

Existing code reasoning methods primarily supervise final code outputs, ignoring intermediate states, often leading to reward hacking where correct answers are obtained through inconsistent reasoning. We propose StepCodeReasoner, a framework that introduces explicit intermediate execution-state supervision. By automatically inserting structured print-based execution-trace anchors into code, the model is trained to predict runtime states at each step, transforming code reasoning into a verifiable, stepwise execution modeling problem. Building on this execution-aware method, we introduce Bi-Level GRPO, a reinforcement learning algorithm for structured credit assignment at two levels: inter-trajectory, comparing alternative execution paths, and intra-trajectory, rewarding intermediate accuracy based on its impact on downstream correctness. Extensive experiments demonstrate that StepCodeReasoner achieves SOTA performance in code reasoning. In particular, our 7B model achieves 91.1\% on CRUXEval and 86.5\% on LiveCodeBench, outperforming the CodeReasoner-7B baseline (86.0\% and 77.7\%) and GPT-4o (85.6\% and 75.1\%). Furthermore, on the execution-trace benchmark REval, our model scores 82.9\%, outperforming baseline CodeReasoner-7B (72.3\%), its 14B counterpart (81.1\%), and GPT-4o (77.3\%). Additionally, our approach also improves code generation performance, demonstrating that explicit execution modeling enhances both code reasoning and code generation.

We study auto research as a closed empirical loop driven by external measurement. Each submitted trial carries a hypothesis, an executable code edit, an evaluator-owned outcome, and feedback that shapes the next proposal. The output is not a generated paper or a single model checkpoint, but an auditable trajectory of proposals, code diffs, experiments, scores, and failure labels. We instantiate this loop with specialist agents that partition recipe surfaces and share measured lineage across trials. The central empirical finding is that lineage feedback lets agents turn evaluator outcomes, including crashes, budget overruns, size failures, and accuracy-gate misses, into later program-level recipe edits rather than one-shot suggestions. Across 1,197 headline-run trials plus 600 Parameter Golf control trials after one-time setup and launch, humans did not choose proposals, edit recipes, override scores, or repair failed trials during the search. In the three headline runs, the same submitted-trial loop reduces Parameter Golf validation bpb by 0.81%, raises NanoChat-D12 CORE by 38.7%, and reduces CIFAR-10 Airbench96 wallclock by 4.59%, with each task measured by its own external evaluator and legality checks. The trace includes a strict architecture-domain audit of 157 headline-run submissions and program rewrites such as a NanoChat attention-kernel path change. Within this scope the loop autonomously writes code, submits experiments, absorbs feedback, applies and combines known techniques inside each environment, and improves public starting recipes.

Large language model (LLM) coding agents are increasingly deployed to autonomously perform software engineering tasks in terminal-based environments, making their reliability a growing concern. Existing empirical studies investigate why coding agents fail, yet they largely treat failure as a final outcome rather than a temporal process, providing limited insight into how failures emerge, evolve, and become unrecoverable. We present the first large-scale empirical study of CLI coding-agent failure trajectories, introducing a process-oriented framework that analyzes failure through its onset, evolution, and recovery across execution trajectories. We first collect 3,843 execution trajectories generated by seven frontier models across three coding-agent scaffolds (OpenHands, MiniSWE, and Terminus2) on Terminal-Bench, then carefully filter them to obtain 1,794 complete and valid trajectories for manual annotation (over 63,000 execution steps), from which we derive 14 findings spanning failure occurrence, root causes, recovery, and cross-system consistency. Our findings show that coding-agent failures are predominantly driven by epistemic errors, typically begin within the first few execution steps, and often remain hidden until recovery is no longer possible, suggesting that improving coding-agent reliability requires earlier validation and intervention rather than relying solely on final-outcome evaluation.

Existing benchmarks for LLM coding agents primarily evaluate final outcomes. While useful for measuring overall capability, these metrics provide limited visibility and often miss defects that arise during execution. We present ProcCtrlBench, a benchmark for execution-process evaluation in LLM coding agents. ProcCtrlBench organizes recurrent execution defects into a reusable ontology covering 11 defect types in 4 categories, and evaluates agent trajectories through standardized process evidence rather than final outcomes alone. To support comparison across heterogeneous agents, ProcCtrlBench standardizes raw logs into a unified trajectory representation and reports calibrated scorecards over process-level findings. In addition, ProcCtrlBench uses control preservation as a way to quantify execution-process quality, capturing whether execution remains interpretable, interruptible, correctable, reversible, and able to hand back authority when needed. We evaluate ProcCtrlBench on 200 cases sampled from three benchmarks: AndroidBench, TerminalBench, and SWE-bench-Verified. Results show that ProcCtrlBench can be instantiated with useful reliability, provides more stable semantics than direct thresholding, and reveals meaningful differences in execution quality that are often overlooked by conventional outcome-based evaluation.

Program errors can occur in any type of programming, and can manifest in a variety of ways, such as unexpected output, crashes, or performance issues. And program error diagnosis can often be too abstract or technical for developers to understand, especially for beginners. The goal of this paper is to present a novel machine-learning approach for Multi-task Program Error Repair and Explanatory Diagnosis (mPRED). A pre-trained language model is used to encode the source code, and a downstream model is specifically designed to identify and repair errors. Programs and test cases will be augmented and optimized from several perspectives. Additionally, our approach incorporates a "chain of thoughts" method, which enables the models to produce intermediate reasoning explanations before providing the final correction. To aid in visualizing and analyzing the program structure, we use a graph neural network for program structure visualization. Overall, our approach offers a promising approach for repairing program errors across different programming languages and providing helpful explanations to programmers.

In recent years, trace generation has emerged as a significant challenge within the Process Mining community. Deep Learning (DL) models have demonstrated accuracy in reproducing the features of the selected processes. However, current DL generative models are limited in their ability to adapt the learned distributions to generate data samples based on specific conditions or attributes. This limitation is particularly significant because the ability to control the type of generated data can be beneficial in various contexts, enabling a focus on specific behaviours, exploration of infrequent patterns, or simulation of alternative 'what-if' scenarios. In this work, we address this challenge by introducing a conditional model for process data generation based on a conditional variational autoencoder (CVAE). Conditional models offer control over the generation process by tuning input conditional variables, enabling more targeted and controlled data generation. Unlike other domains, CVAE for process mining faces specific challenges due to the multiperspective nature of the data and the need to adhere to control-flow rules while ensuring data variability. Specifically, we focus on generating process executions conditioned on control flow and temporal features of the trace, allowing us to produce traces for specific, identified sub-processes. The generated traces are then evaluated using common metrics for generative model assessment, along with additional metrics to evaluate the quality of the conditional generation

The optimization of long-horizon agents increasingly relies on reflection-based mechanisms, where a large language model (LLM) acts as an optimizer to diagnose agent failures and improve agent policies. However, real execution traces are difficult to use directly for optimization: large trace collections are often redundant and heterogeneous, making optimization inefficient and prone to overfitting to low-value failures; meanwhile, each individual trajectory also contains many irrelevant steps, while naive context reduction methods such as truncation or sliding windows can discard causally important evidence and produce misleading optimization signals. To resolve this dilemma, we introduce STRACE (Structural TRajectory Analysis and Causal Extraction), a framework that constructs high signal-noise optimization contexts for more precise and effective optimization. At the batch level, STRACE mines failure patterns to filter redundant traces and retain representative failures; within each selected trace, it performs causal localization over a textual dependency graph to remove non-causal steps and identify the true root-cause module for optimization. Empirical results demonstrate that STRACE significantly outperforms standard context-filtering baselines. Notably, on a challenging formal verification task (VeruSAGE-Bench), it successfully optimizes human-expert designed agents, delivering 1.4times success-rate improvement (42.5% to 58.5%). The code is available at https://github.com/moomight/STRACE .

An agent system's execution traces record how it fails, and procedures that improve such a system without changing model weights (trajectory selection, prompt and workflow optimization, runtime monitoring) read these traces for feedback. Yet raw traces are a poor medium for accumulating that feedback: long, instance-specific, and lacking a stable vocabulary for recurring failures. We argue that an agent system should instead maintain an explicit representation of how it fails, induced from its own behavior and reusable wherever failure feedback is needed. AdaMAST builds this representation by converting a target system's traces into a compact, evidence-grounded failure taxonomy: named failure codes organized along three fixed axes (system-level, role-specific, and domain-specific), with every name, definition, and evidence pattern induced from the traces; no code is hand-authored, no trace human-annotated. The taxonomy is not merely a post-hoc diagnostic but a shared feedback interface, improving agents in three ways. In agent-system search, taxonomy-coded diagnoses of failed candidates outperform free-form reflection on all five benchmarks we test. At runtime, taxonomy feedback raises SWE-agent's resolution on SWE-bench Verified Mini from 60% with free-text reflection to 70%, and improves Claude Code from 64.0% to 70.7% as a runtime skill. In trajectory selection, AdaMAST-Judge, a verifier built on the induced codes, improves best-of-5 accuracy on Terminal-Bench 2.0 by 8-15 points over Pass@1. The vocabulary itself is compact (an order-of-magnitude compression that preserves trace distinctions), human-faithful (matching expert failure annotations more closely than a hand-crafted reference vocabulary), and adaptive (taxonomies induced for different domains share few codes). Adaptive failure taxonomies close the loop between the traces agents produce and the procedures that improve them.

When a professional web developer's code fails a test, they do not simply re-read the stack trace. They open the application in a browser, click buttons, inspect computed styles, and run diagnostic commands to understand what went wrong. Existing feedback mechanisms for coding agents rely on screenshots, LLM-as-a-judge scoring, or natural-language corrections, but few interact with the live application the way a developer would. We introduce WatchPoint, a simulated-user system that mimics real developer behavior by generating and executing diagnostic scripts against the running application, producing structured observations that guide the coding model's retry. Unlike prior approaches that target single-file edits or evaluate using non-executable metrics, we operate on Web-Bench, a benchmark of 50 multi-file web projects comprising 1,000 sequentially dependent tasks, verified by deterministic end-to-end tests. WatchPoint recovers 57.6% of the tasks it diagnoses, and a controlled user study confirms the simulation's realism: human testers achieve a comparable recovery rate (54.5%), providing evidence that automated diagnostic scripts can substitute for interactive human testing on sequential web development tasks. We further identify a pattern of capability gaps that governs when simulated-user feedback is helpful and when it should be withheld.

Knowledge graph engineering often distributes accepted state, observations, constraints, processes, and hypothetical scenarios across artifacts whose combined execution contract remains external. We present PULSE, an Object-Process-Methodology-inspired language that localizes four operational roles and their write effects in one typed runtime. Here, modes denote operational roles rather than modal or deontic logic. The implemented contract fixes evidence non-overwrite, branch isolation, grounded multi-subject timers, guarded state change, and declaration-ranked event ordering over time and space; an external runner still decides whether evidence becomes an authoritative move. GeoSPARQL, SOSA, and SHACL remain generated views. A core calculus gives an effect-confinement lemma and six safety properties. Lean 4 checks kernel analogues for positions, evidence, clocks, monitors, atomicity, and branch source retention; 88 tests, 3,534 bounded checks, and 32 Lean/Python runtime-kernel cases bound the implementation claim to the checked cases. First-author implementations of a standards composition and a separate Sismic statechart reproduce the tested cold-chain trace. Across 37,440 generated temporal traces, PULSE matches a separate workflow and distinguishes ten single-field mutants. On the complete NOAA IBTrACS since1980 subset it agrees with GEOS and an event sweep on 1,476,290 transition-zone pairs, including 4,800 sampled and 12,831 duration-qualified events. Project-specific GeoSPARQL probes measure interface coverage. Overall, the results support contract localization, safety arguments, and trace parity for the tested fragment; language superiority and usability remain outside the evaluation.

Large language model (LLM) agents now execute long, tool-using tasks where final outcome checks can arrive too late for intervention. Online warning requires lightweight prefix monitors over heterogeneous traces, but hand-authored event schemas are brittle and deployment-time LLM judging is costly. We introduce PrefixGuard, a trace-to-monitor framework with an offline StepView induction step followed by supervised monitor training. StepView induces deterministic typed-step adapters from raw trace samples, and the monitor learns an event abstraction and prefix-risk scorer from terminal outcomes. Across WebArena, τ^2-Bench, SkillsBench, and TerminalBench, the strongest PrefixGuard monitors reach 0.900/0.710/0.533/0.557 AUPRC. Using the strongest backend within each representation, they improve over raw-text controls by an average of +0.137 AUPRC. LLM judges remain substantially weaker under the same prefix-warning protocol. We also derive an observability ceiling on score-based area under the precision-recall curve (AUPRC) that separates monitor error from failures lacking evidence in the observed prefix. For finite-state audit, post-hoc deterministic finite automaton (DFA) extraction remains compact on WebArena and τ^2-Bench (29 and 20 states) but expands to 151 and 187 states on SkillsBench and TerminalBench. Finally, first-alert diagnostics show that strong ranking does not imply deployment utility: WebArena ranks well yet fails to support low-false-alarm alerts, whereas τ^2-Bench and TerminalBench retain more actionable early alerts. Together, these results position PrefixGuard as a practical monitor-synthesis recipe with explicit diagnostics for when prefix warnings translate into actionable interventions.

MOLOT (Malicious Operational Logic Observation Transformer) is a static malicious-code detection system designed for SAST setup where package metadata, maintainer history, and dynamic execution traces may be unavailable or unreliable. The system represents source code as behavior sequences derived from static call graphs, includes an explanation stage that ranks suspicious behavior activities and maps them back to source-code locations. The approach is evaluated on Python and JavaScript packages from PyPI and npm, compared with opensource detection tools, and validated under product constraints including runtime, memory use, and false-positive rates observed in a real moderation workflow. We also release Open Malicious-Code Bench, a public benchmark for reproducible evaluation of malicious-package detection methods. The results show that static behavior-sequence modeling can provide accurate, explainable, and deployable malicious-code detection for modern DevSecOps workflows.

Recent agent benchmarks increasingly ground evaluation in executable environments, from code repair to web navigation, app APIs, and function calling. Yet completing consequential work beyond code requires more than producing a plausible response or valid tool call: agents must gather missing information over multiple turns, follow domain policies, coordinate dependent tools, and realize the correct persistent state transition without collateral effects. In this paper, we introduce Thinkingbox, a sandbox for tool-agent-user interaction that provides isolated MCP-compatible tool sessions, complete execution traces, and outcome evaluation over terminal backend state. Built on this sandbox, Thinkingbox-bench contains 507 policy-conditioned workflows across numerous scenarios, including retail, hospitality, auto insurance, neobank internal IT, and consulting IT/HR support. Each attempt is evaluated by task-specific executable checks that accept valid trajectories while rejecting wrong, missing, or extra effects; designated tasks additionally check required properties of the final response. Across proprietary and open-weight models, the strongest achieves 65.36% pass@1, but only 25.25% pass^20. Moreover, many failed trials show clean termination and valid state-changing actions, showing that response or tool-call-level signals are not clear proxies for end-to-end task completion. Thinkingbox-bench reveals a large gap between occasionally finding a successful trajectory and reliably completing stateful business tasks. We release both Thinkingbox and Thinkingbox-Bench: https://github.com/microsoft/thinkingbox

Agent Skills package procedural instructions and checks for use by general-purpose agents, but loading a skill does not guarantee that every requirement remains active throughout a long tool-using trajectory. We study this problem in a production-derived, white-box code-audit workflow. Holding the task and 24 artifact checks fixed, we vary the surrounding context and classify where failures first become visible: lost requirements, editing drift, failed checking, or non-agent evaluator/runtime failures. Codex with gpt-5.4-mini passes 8/10 runs in a 10,991-character clean context but only 3/10 in both a 299,140-character relevant context and an equal-length irrelevant context. This 50-percentage-point difference is large but remains trend-level under two-sided Fisher tests (p = 0.0698). Requirement coverage nevertheless stays above 92% in both long conditions, showing that a few omissions can invalidate an otherwise complete artifact. A second task passes all clean and long runs, so the evidence does not support a universal context-length threshold. A detailed external checklist passes 10/10 runs, compared with 5/10 for a generic self-check (p = 0.0325). Coding-agent scaffolds may help by selecting a smaller working set, but they do not eliminate failures. We do not introduce context rot or a new general monitoring method; we provide a bounded failure classification and empirical case study for white-box code auditing.

Modern web dashboards and enterprise applications increasingly rely on complex, distributed microservices architectures. While these architectures offer scalability, they introduce significant challenges in debugging and observability. When failures occur, they often manifest as opaque error messages to the end-user such as Something went wrong. This masks the underlying root cause which may reside in browser side exceptions, API contract violations, or server side logic failures. Existing monitoring tools capture these events in isolation but fail to correlate them effectively or provide intelligible explanations to non technical users. This paper proposes a novel system for Automated Multi Source Debugging and Natural Language Error Explanation. The proposed framework automatically collects and correlates error data from disparate sources such as browser, API, server logs and validates API contracts in real time, and utilizes Large Language Models to generate natural language explanations. This approach significantly reduces Mean Time to Resolution for support engineers and improves the user experience by transforming cryptic error codes into actionable insights.

Vibe coding produces correct, executable code at speed, but leaves no record of the structural commitments, dependencies, or evidence behind it. Reviewers cannot determine what invariants were assumed, what changed, or why a regression occurred. This is not a generation failure but a control failure: the dominant artifact of AI-assisted development (code plus chat history) performs dimension collapse, flattening complex system topology into low-dimensional text and making systems opaque and fragile under change. We propose Agentic Consensus: a paradigm in which the consensus layer C, an operable world model represented as a typed property graph, replaces code as the primary artifact of engineering. Executable artifacts are derived from C and kept in correspondence via synchronization operators Phi (realize) and Psi (rehydrate). Evidence links directly to structural claims in C, making every commitment auditable and under-specification explicit as measurable consensus entropy rather than a silent guess. Evaluation must move beyond code correctness toward alignment fidelity, consensus entropy, and intervention distance. We propose benchmark task families designed to measure whether consensus-based workflows reduce human intervention compared to chat-driven baselines.

Code execution is a fundamental aspect of programming language semantics that reflects the exact behavior of the code. However, most pre-trained models for code intelligence ignore the execution trace and only rely on source code and syntactic structures. In this paper, we investigate how well pre-trained models can understand and perform code execution. We develop a mutation-based data augmentation technique to create a large-scale and realistic Python dataset and task for code execution, which challenges existing models such as Codex. We then present CodeExecutor, a Transformer model that leverages code execution pre-training and curriculum learning to enhance its semantic comprehension. We evaluate CodeExecutor on code execution and show its promising performance and limitations. We also demonstrate its potential benefits for code intelligence tasks such as zero-shot code-to-code search and text-to-code generation. Our analysis provides insights into the learning and generalization abilities of pre-trained models for code execution.

The increasing adoption of agentic workflows across diverse domains brings a critical need to scalably and systematically evaluate the complex traces these systems generate. Current evaluation methods depend on manual, domain-specific human analysis of lengthy workflow traces - an approach that does not scale with the growing complexity and volume of agentic outputs. Error analysis in these settings is further complicated by the interplay of external tool outputs and language model reasoning, making it more challenging than traditional software debugging. In this work, we (1) articulate the need for robust and dynamic evaluation methods for agentic workflow traces, (2) introduce a formal taxonomy of error types encountered in agentic systems, and (3) present a set of 148 large human-annotated traces (TRAIL) constructed using this taxonomy and grounded in established agentic benchmarks. To ensure ecological validity, we curate traces from both single and multi-agent systems, focusing on real-world applications such as software engineering and open-world information retrieval. Our evaluations reveal that modern long context LLMs perform poorly at trace debugging, with the best Gemini-2.5-pro model scoring a mere 11% on TRAIL. Our dataset and code are made publicly available to support and accelerate future research in scalable evaluation for agentic workflows.

Logs, being run-time information automatically generated by software, record system events and activities with their timestamps. Before obtaining more insights into the run-time status of the software, a fundamental step of log analysis, called log parsing, is employed to extract structured templates and parameters from the semi-structured raw log messages. However, current log parsers are all syntax-based and regard each message as a character string, ignoring the semantic information included in parameters and templates. Thus, we propose the semantic-based parser SemParser to unlock the critical bottleneck of mining semantics from log messages. It contains two steps, an end-to-end semantic miner and a joint parser. Specifically, the first step aims to identify explicit semantics inside a single log, and the second step is responsible for jointly inferring implicit semantics and computing structural outputs based on the contextual knowledge base. To analyze the effectiveness of our semantic parser, we first demonstrate that it can derive rich semantics from log messages collected from six widely-applied systems with an average F1 score of 0.985. Then, we conduct two representative downstream tasks, showing that current downstream models improve their performance with appropriately extracted semantics by 1.2%-11.7% and 8.65% on two anomaly detection datasets and a failure identification dataset, respectively. We believe these findings provide insights into semantically understanding log messages for the log analysis community.

Language-model agents increasingly use tools to act on external systems. Earlier actions can alter files, permissions, database records, or other state, making a later routine-looking action harmful. Yet the visible interaction may not reveal the underlying state needed to assess that action. We formulate attack and defense as partially observed state control in SEAD, deriving their design requirements from this shared execution process. Because attackers supply instructions while the target chooses concrete actions, DART decomposes harmful goals into locally plausible steps and uses feedback from actual tool execution to guide trajectory search. The defender must decide before execution with incomplete state evidence. SAGE can therefore investigate relevant state through read-only queries before allowing or blocking each action, including those proposed after a block. We construct an environment-verifiable dataset integrating controlled initial states, replayable tool environments, and task-specific executable checks. Across four target models, DART improves semantic attack success by 18.8--35.9 percentage points over the competing baseline, with consistent gains under executable verification. On recorded trajectories, SAGE preserves 95.79% of benign trajectories while intercepting 92.73% of harmful paths by the harm-enabling boundary. In online attack-defense evaluation, it reduces DART's executable attack success from 48.0% to 4.0%. SAGE remains effective across four attack methods and generalizes to out-of-domain environments. Our code and data is available at https://github.com/EverywhereSafety/SEAD.

Code agents can autonomously resolve GitHub issues, yet when they fail, current evaluation provides no visibility into where or why. Metrics such as Pass@1 collapse an entire execution into a single binary outcome, making it difficult to identify where and why the agent went wrong. To address this limitation, we introduce TRAJEVAL, a diagnostic framework that decomposes agent trajectories into three interpretable stages: search (file localization), read (function comprehension), and edit (modification targeting). For each stage, we compute precision and recall by comparing against reference patches. Analyzing 16,758 trajectories across three agent architectures and seven models, we find universal inefficiencies (all agents examine approximately 22x more functions than necessary) yet distinct failure modes: GPT-5 locates relevant code but targets edits incorrectly, while Qwen-32B fails at file discovery entirely. We validate that these diagnostics are predictive, achieving model-level Pass@1 prediction within 0.87-2.1% MAE, and actionable: real-time feedback based on trajectory signals improves two state-of-the-art models by 2.2-4.6 percentage points while reducing costs by 20-31%. These results demonstrate that our framework not only provides a more fine-grained analysis of agent behavior, but also translates diagnostic signals into tangible performance gains. More broadly, TRAJEVAL transforms agent evaluation beyond outcome-based benchmarking toward mechanism-driven diagnosis of agent success and failure.

Reactive programming frameworks such as React allow developers to build interactive applications by declaratively specifying how outputs depend on changing inputs. Although this model makes it easy to reason about what an application computes, the temporal behavior of reactive programs remains difficult to understand and verify. Applications implicitly rely on timing assumptions buried in framework runtimes, leading to subtle bugs such as stale reads, transient inconsistencies, order-dependent behavior, and unintended feedback cycles. To address these challenges, this paper presents Willow, a core calculus for reactive programming inspired by React. Willow gives a time-aware operational semantics that models computation in terms of renders, the fundamental evaluation step in which components produce user interface descriptions, and pairs it with a novel type-and-effect system that statically tracks timing behavior as effects. A "next" modality expresses delays measured not only in renders but in any unit the host environment exposes--renders, network requests, or milliseconds. A family of modalities tracks the lifecycle of event handlers: when they are registered, when they fire, when pending events are canceled and when handlers are removed. A key insight is that the resulting effects form a temporal dependency graph, letting standard graph algorithms statically detect render cascades and inter-render loops that cause non-termination or performance degradation. We formalize Willow and prove preservation of the effect system with respect to the time-aware semantics. We also implement a prototype checker with automatic effect inference and evaluate it on representative reactive patterns such as debouncing, form inputs, and API-driven updates. Our results demonstrate that time-aware typing provides a practical foundation for reasoning about the temporal correctness of reactive programs.

Large language model (LLM) agents combine language-based reasoning with external tools to perform complex tasks. Adversarial inputs can exploit interactions between the agent and its environment, causing the agent to violate safety policies during execution. Yet existing evaluations often reduce agent safety to a single attack success rate (ASR), collapsing exposure, execution, observation, and adjudication and potentially conflating actual violations with evidence visibility. We introduce REDAgentBench, an executable framework for autonomous red-teaming and faithful measurement. It derives attacks from explicit safety constraints and associated agent-system vulnerabilities, runs them in isolated service sandboxes, and verifies harmful effects from service receipts and final-state changes. The benchmark contains 1,661 cases across five service surfaces. Across six models and three agent harnesses, macro-average ASR is 65.69%; reported ASR varies with harness and evidence view, while evaluation-context disclosure changes execution behavior. In a state-grounded diagnostic cohort, almost one in five confirmed violations with resolved action anchors occurs after the agent states the relevant constraint or risk, revealing a Recognition--Execution Gap. Finally, a training-free policy reminder reduces confirmed violations by more than 70 percentage points in matched replay. These findings show that executable evaluation can improve safety measurement and identify actionable intervention points.

In this paper we present a novel solution that combines the capabilities of Large Language Models (LLMs) with Formal Verification strategies to verify and automatically repair software vulnerabilities. Initially, we employ Bounded Model Checking (BMC) to locate the software vulnerability and derive a counterexample. The counterexample provides evidence that the system behaves incorrectly or contains a vulnerability. The counterexample that has been detected, along with the source code, are provided to the LLM engine. Our approach involves establishing a specialized prompt language for conducting code debugging and generation to understand the vulnerability's root cause and repair the code. Finally, we use BMC to verify the corrected version of the code generated by the LLM. As a proof of concept, we create ESBMC-AI based on the Efficient SMT-based Context-Bounded Model Checker (ESBMC) and a pre-trained Transformer model, specifically gpt-3.5-turbo, to detect and fix errors in C programs. Our experimentation involved generating a dataset comprising 1000 C code samples, each consisting of 20 to 50 lines of code. Notably, our proposed method achieved an impressive success rate of up to 80% in repairing vulnerable code encompassing buffer overflow and pointer dereference failures. We assert that this automated approach can effectively incorporate into the software development lifecycle's continuous integration and deployment (CI/CD) process.

LLM-based agents execute multi-step tasks, but their behavioral structure remains opaque: long unstructured traces resist the safety auditing and runtime monitoring that deployment requires. Existing approaches operate per-trace or success-only, so they miss the cross-run topology that links next-step and failure prediction. To recover that shared structure, we collapse an entire trace corpus into a single, compact finite-state machine (FSM) that serves as a structural substrate for the otherwise unpredictable behavior of LLM agents. Across twelve public datasets, the FSMs are compact (7-43 states), replay held-out data at >=0.997 fitness with near-identical topology across splits, and build in milliseconds. This substrate addresses both prediction goals. For next-step prediction, FSM-state context outperforms Agent Workflow Memory on every ground-truth-matched dataset. For failure prediction, per-state behavioral features reach held-out AUROC up to 0.94, and an online monitor ranks failing runs above passing ones from a partial trace, triggering early stopping well before completion. Behavioral topology thus appears shaped more by the deployment harness than by the LLM, providing a model-agnostic structural primitive for safety auditing and runtime monitoring.

Symbolic execution detects vulnerabilities with precision, but applying it to large codebases requires harnesses that set up symbolic state, model dependencies, and specify assertions. Writing these harnesses has traditionally been a manual process requiring expert knowledge, which significantly limits the scalability of the technique. We present Static Analysis Informed and LLM-Orchestrated Symbolic Execution (SAILOR), which automates symbolic execution harness construction by combining static analysis with LLM-based synthesis. SAILOR operates in three phases: (1) static analysis identifies candidate vulnerable locations and generates vulnerability specifications; (2) an LLM uses vulnerability specifications and orchestrates harness synthesis by iteratively refining drivers, stubs, and assertions against compiler and symbolic execution feedback; symbolic execution then detects vulnerabilities using the generated harness, and (3) concrete replay validates the symbolic execution results against the unmodified project source. This design combines the scalability of static analysis, the code reasoning of LLMs, the path precision of symbolic execution, and the ground truth produced by concrete execution. We evaluate SAILOR on 10 open-source C/C++ projects totaling 6.8 M lines of code. SAILOR discovers 379 distinct, previously unknown memory-safety vulnerabilities (421 confirmed crashes). The strongest of five baselines we compare SAILOR to (agentic vulnerability detection using Claude Code with full codebase access and unlimited interaction), finds only 12 vulnerabilities. Each phase of SAILOR is critical: Without static analysis targeting confirmed vulnerabilities drop 12.2X; without iterative LLM synthesis zero vulnerabilities are confirmed; and without symbolic execution no approach can detect more than 12 vulnerabilities.

Large language models can generate fluent answers that are unfaithful to the provided context, while many safeguards rely on external verification or a separate judge after generation. We introduce internal flow signatures that audit decision formation from depthwise dynamics at a fixed inter-block monitoring boundary. The method stabilizes token-wise motion via bias-centered monitoring, then summarizes trajectories in compact moving readout-aligned subspaces constructed from the top token and its close competitors within each depth window. Neighboring window frames are aligned by an orthogonal transport, yielding depth-comparable transported step lengths, turning angles, and subspace drift summaries that are invariant to within-window basis choices. A lightweight GRU validator trained on these signatures performs self-checking without modifying the base model. Beyond detection, the validator localizes a culprit depth event and enables a targeted refinement: the model rolls back to the culprit token and clamps an abnormal transported step at the identified block while preserving the orthogonal residual. The resulting pipeline provides actionable localization and low-overhead self-checking from internal decision dynamics. Code is available at github.com/EavnJeong/Internal-Flow-Signatures-for-Self-Checking-and-Refinement-in-LLMs.

AI-assisted software generation has increased development speed, but it has also amplified a persistent engineering problem: systems that are functionally correct may still be structurally insecure. In practice, prompt-based security review with large language models often suffers from uneven coverage, weak reproducibility, unsupported findings, and the absence of an immutable audit trail. The ESAA architecture addresses a related governance problem in agentic software engineering by separating heuristic agent cognition from deterministic state mutation through append-only events, constrained outputs, and replay-based verification. This paper presents ESAA-Security, a domain-specific specialization of ESAA for agent-assisted security auditing of software repositories, with particular emphasis on AI-generated or AI-modified code. ESAA-Security structures auditing as a governed execution pipeline with four phases reconnaissance, domain audit execution, risk classification, and final reporting and operationalizes the workflow into 26 tasks, 16 security domains, and 95 executable checks. The framework produces structured check results, vulnerability inventories, severity classifications, risk matrices, remediation guidance, executive summaries, and a final markdown/JSON audit report. The central idea is that security review should not be modeled as a free-form conversation with an LLM, but as an evidence-oriented audit process governed by contracts and events. In ESAA-Security, agents emit structured intentions under constrained protocols; the orchestrator validates them, persists accepted outputs to an append-only log, reprojects derived views, and verifies consistency through replay and hashing. The result is a traceable, reproducible, and risk-oriented audit architecture whose final report is auditable by construction.

The model context protocol (MCP) standardizes how LLMs connect to external tools and data sources, enabling faster integration but introducing new attack vectors. Despite the growing adoption of MCP, existing MCP security studies classify attacks by their observable effects, obscuring how attacks behave across different MCP server components and overlooking multi-component attack chains. Meanwhile, existing defenses are less effective when facing multi-component attacks or previously unknown malicious behaviors. This work presents a component-centric perspective for understanding and detecting malicious MCP servers. First, we build the first component-centric PoC dataset of 114 malicious MCP servers where attacks are achieved as manipulation over MCP components and their compositions. We evaluate these attacks' effectiveness across two MCP hosts and five LLMs, and uncover that (1) component position shapes attack success rate; and (2) multi-component compositions often outperform single-component attacks by distributing malicious logic. Second, we propose and implement Connor, a two-stage behavioral deviation detector for malicious MCP servers. It first performs pre-execution analysis to detect malicious shell commands and extract each tool's function intent, and then conducts step-wise in-execution analysis to trace each tool's behavioral trajectories and detect deviations from its function intent. Evaluation on our curated dataset indicates that Connor achieves an F1-score of 94.6%, outperforming the state of the art by 8.9% to 59.6%. In real-world detection, Connor identifies two malicious servers.

Background: Some developer activity traditionally performed manually, such as making code commits, opening, managing, or closing issues is increasingly subject to automation in many OSS projects. Specifically, such activity is often performed by tools that react to events or run at specific times. We refer to such automation tools as bots and, in many software mining scenarios related to developer productivity or code quality it is desirable to identify bots in order to separate their actions from actions of individuals. Aim: Find an automated way of identifying bots and code committed by these bots, and to characterize the types of bots based on their activity patterns. Method and Result: We propose BIMAN, a systematic approach to detect bots using author names, commit messages, files modified by the commit, and projects associated with the ommits. For our test data, the value for AUC-ROC was 0.9. We also characterized these bots based on the time patterns of their code commits and the types of files modified, and found that they primarily work with documentation files and web pages, and these files are most prevalent in HTML and JavaScript ecosystems. We have compiled a shareable dataset containing detailed information about 461 bots we found (all of whom have more than 1000 commits) and 13,762,430 commits they created.

LLM agents increasingly perform autonomous actions through external tools, leading to complex and evolving safety risks. However, existing safety testing targets expert-designed safety violations, and the corresponding outcomes are evaluated by hard-coded rules, making them costly to extend as agents evolve. To this end, we present Vera, an end-to-end automated safety testing framework that instantiates software engineering testing principles for non-deterministic agents through a three-stage, self-reinforcing pipeline. First, a literature-driven exploration continuously discovers and structures emerging risks into taxonomies of safety risks, attack methods, and tool execution environments. Second, combinatorial composition across taxonomy dimensions produces executable safety cases, each specifying a concrete safety goal, a programmatically constructed initial state, and a deterministic verification predicate grounded in observable artifacts. Third, adaptive execution runs heterogeneous agents in isolated sandboxes where a control agent steers multi-turn interaction based on runtime observations, while evidence-grounded verifiers judge outcomes from environment state and tool-call evidence rather than model self-report. We evaluate Vera on four production agent frameworks (OpenClaw, Hermes, Codex, Claude Code), revealing substantial safety weaknesses, with average attack success rates reaching 93.9\% under multi-channel attacks; we also release Vera-Bench, comprising 1600 executable safety cases spanning 124 risk categories across three execution settings. These results indicate that modular, executable testing infrastructure is essential for rigorous and maintainable safety evaluation of rapidly evolving agentic systems at scale. The code is publicly available at https://github.com/Yunhao-Feng/Vera.

The behavior of an LLM agent is determined not only by the underlying model, but also by its harness: the executable program that constructs context, invokes tools, verifies intermediate results, and recovers from failures. Existing approaches optimize such harnesses before deployment, searching training or development data for a fixed agent workflow that is then frozen at test time. This limits adaptation when the test distribution, failure modes, or tool interactions differ from those seen during development. We ask whether the harness can instead be optimized during evaluation itself, using only the unlabeled execution traces the agent produces on the test inputs. We introduce Test-Time Harness Evolution (TTHE), which treats the executable harness as the state of test-time adaptation. During evaluation, TTHE maintains a population of candidate harnesses and refines them through an agentic proposer that reasons over their execution traces, without gold labels or task-specific supervision; a judge then commits an improved harness from execution-derived proxy signals, and the selected program persists to govern subsequent inputs. Crucially, TTHE does not update model weights, require gold labels, or train a separate adaptation model: solver, proposers, and judge are different roles and harnesses around the same frozen LLM, so all adaptation occurs through changes to the surrounding program. Across text-to-SQL, competitive programming, software engineering, data-science coding, and agentic tool-use tasks, TTHE improves fixed ReAct-style baseline harnesses, yielding persistent, inspectable improvements rather than a pre-searched workflow or per-query retries. These results recast test-time adaptation for LLM agents as evolution over executable control programs and identify execution-derived proxy reliability as a central challenge for robust unsupervised agent improvement.

Agent benchmarks often evaluate only final answers even when agents run on stateful runtimes. We argue this under-specifies what is being evaluated: the proper unit is a declared model-plus-runtime configuration whose failures can occur in evidence acquisition, runtime routing, safety boundaries, or repeated execution. We present ClawProBench, a trace-aware benchmark for runtime-native agent evaluation instantiated on OpenClaw, a live agent runtime with workspace tools and native surfaces for browsing, memory, messaging, scheduling, skills, and subagents. ClawProBench defines two tracks: a 102-scenario full profile with live workspace and native-runtime routing tasks, and a frozen 68-scenario holdout with closed-world JSON output contracts for robust ranking. Trials are scored from execution traces via a safety-gated formula combining correctness, process quality, and efficiency, preserving failure evidence for audit. Our anonymous artifact includes benchmark definitions, scoring code, manifests and sanitized traces. We evaluate 68 configurations on the full profile and 37 on holdout. The top safety-gated average trace score is 0.7671. Native-runtime tasks underperform workspace-live tasks (0.5238 vs. 0.6415). On holdout, pass@k-any outperforms strict three-trial pass (0.6638 vs. 0.2890), while full-profile and holdout rankings show weak alignment (Spearman 0.1300). Rankings based purely on correctness differ substantially from process-aware, safety-gated and strict-pass views. Final-answer leaderboards may hide native-surface weaknesses, one-off successes and trace-local agent failure modes.

Training terminal agents requires scalable executable supervision, yet synthesizing high-quality terminal tasks remains challenging. Each task couples an instruction, an initialized environment, a reference solution, and an executable verifier; if these artifacts are generated from inconsistent assumptions, the resulting task may be unsolvable or incorrectly evaluated. Meanwhile, multi-stage synthesis can discard the goals, dependencies, state transitions, and procedural constraints encoded in the original sources. We present FACET (Fine-grained Agentic Construction of Executable Tasks), a framework that addresses both information preservation and cross-artifact consistency. FACET reconstructs related agent skills into coherent, information-rich scenarios, then realizes and repairs the execution environment before generating the final task artifacts. The resulting container state serves as shared grounding for the instruction, solution, and verifier, while execution-based validation and targeted repair correct artifact-specific failures without unnecessarily regenerating valid components. FACET produces complex terminal tasks with dense executable checks, and successful trajectories collected from these tasks provide effective, data-efficient supervision. Fine-tuning models across multiple scales consistently improves performance on Terminal-Bench 2.1, while analyses of alternative generation schemes support the importance of environment-grounded construction for task validity and solution-verifier alignment. These results establish source-intent preservation and shared executable-state grounding as key principles for scalable terminal-task synthesis.

GPU training jobs fail often, roughly two in five on large production clusters, yet the operator typically learns of a failure only by reconnecting hours later. Experiment trackers require editing the training script and maintaining a cloud connection; the scheduler's mail hook delivers a single status line with no cause and no logs. GPUAlert is a command-line wrapper that monitors any training command at the process boundary, and with no change to that command, emails a structured notification on completion carrying a classified failure cause, durable logs, and output artifacts. The tool is organized around three reliability primitives: a pre-launch log guarantee that establishes the durable destination before the child process can crash, notifier isolation that makes the wrapper's exit code a pure function of the child's status regardless of whether the email succeeds, and a non-silent artifact budget that bounds attachment size without ever dropping output silently. We release a labelled corpus of 474 GPU training logs across 15 failure classes and a reproducible evaluation harness. On the twelve hardware-reproduced classes, the ordered-rule classifier reaches 0.997 macro-F1, against 0.830 for unordered keyword matching and 0.133 for exit-code inspection. Wrapper overhead is a constant approximately 3ms per job; the pre-launch guarantee preserves a log where a shell redirect yields nothing; and across all 15 failure modes the wrapper returns the child's exit code unchanged even when the SMTP relay is unreachable.

Mining specifications from execution traces presents an automated way of capturing characteristic system behaviors. However, existing approaches are largely restricted to Boolean abstractions of events, limiting their ability to express data-aware properties. In this paper, we extend mining procedures to operate over richer datatypes. We first establish candidate functions in our domain that cover the set of traces by leveraging Syntax Guided Synthesis (SyGuS) techniques. To capture these function applications temporally, we formalize the semantics of TSL_f, a finite-prefix interpretation of Temporal Stream Logic (TSL) that extends LTL_f with support for first-order predicates and functional updates. This allows us to unify a corresponding procedure for learning the data transformations and temporal specifications of a system. We demonstrate our approach synthesizing reactive programs from mined specifications on the OpenAI-Gymnasium ToyText environments, finding that our method is more robust and orders of magnitude more sample-efficient than passive learning baselines on generalized problem instances.

While Large Language Models (LLMs) have substantially advanced text-to-code synthesis, many real programming tasks specify intent through visual artifacts such as screenshots, charts, vector drawings, videos, and interactive states. These tasks require models to connect visual perception to executable programs, because correctness depends not only on syntax but also on layout, data semantics, interaction behavior, and domain-specific constraints that apply after execution. This survey examines Multimodal Code Intelligence, covering systems that generate, edit, refine, or reason with code under visually grounded inputs and outputs. We first formulate the field by the role that code plays in each task, distinguishing code as a rendered artifact, an editable symbolic structure, a scientific representation, an intermediate reasoning trace, or an executable policy or tool interface. We then organize benchmarks and methods into four domains: Graphical User Interface, Scientific Visualization, Structured Graphics, and Frontier Tasks and Frameworks. This taxonomy connects mature artifact-generation problems to emerging agentic and unified settings and allows us to compare how different tasks treat evidence of correctness. Looking ahead, we argue that future research may benefit from four verification-centered directions. Multi-signal validation can combine complementary evidence of correctness, multi-state verification can test behavior across execution trajectories, cross-task transfer testing can probe reusable visual-code skills, and verifiable agent traces can reveal whether agent actions are grounded in visual evidence. Together, these directions may move this field from single-output imitation toward evidence-grounded executable systems. An ongoing project and resources are available on https://github.com/xjywhu/Awesome-Multimodal-LLM-for-Code{GitHub}.

Agentic software-engineering and industrial systems increasingly operate through executable workflows rather than code genera- tion alone: they search artifacts, invoke tools, inspect structured observations, and query databases. Training these agents requires supervision data that captures valid tool interactions and executable workflows. However, traditional query-first data synthesis can fail because plausible user requests may not correspond to valid tool sequences, compatible parameters, or available data. To address this limitation, we propose SyntheticAgentTraceQA, an execution- first framework for generating scalable supervision data for tool- augmented agents. Our framework first constructs high-level work- flow structures, maps them to available tools through dependency- aware assignment, executes and validates the resulting traces in con- trolled environments, and only then synthesizes natural-language user tasks, teacher-generated reasoning annotations, and reference answers. We evaluate the framework across four tool ecosystems and use the resulting data to fine-tune and evaluate Qwen model variants. The results show that execution-grounded supervision improves tool execution behavior, reference-trace agreement, and answer-generation performance on the evaluated tasks. Further analysis reveals a supervision trade-off: masked supervision, which excludes reasoning annotations from the training objective, im- proves final-answer metrics, whereas full supervision, computing loss over the complete assistant output including reasoning tokens, underperforms on answer quality and does not consistently im- prove reference-trace agreement, particularly at the 9B scale. These findings highlight the importance of designing synthetic supervi- sion according to the desired capabilities of tool-augmented agents.

Code translation is a crucial activity in the software development and maintenance process, and researchers have recently begun to focus on using pre-trained large language models (LLMs) for code translation. However, existing LLMs only learn the contextual semantics of code during pre-training, neglecting executability information closely related to the execution state of the code, which results in unguaranteed code executability and unreliable automated code translation. To address this issue, we propose ExeCoder, an LLM specifically designed for code translation, aimed at utilizing executability representations such as functional semantics, syntax structures, and variable dependencies to enhance the capabilities of LLMs in code translation. To evaluate the effectiveness of ExeCoder, we manually enhanced the widely used benchmark TransCoder-test, resulting in a benchmark called TransCoder-test-X that serves LLMs. Evaluation of TransCoder-test-X indicates that ExeCoder achieves state-of-the-art performance in code translation, surpassing existing open-source code LLMs by over 10.88% to 38.78% and over 27.44% to 42.97% on two metrics, and even outperforms the renowned closed-source LLM GPT-4o. Website: https://execoder4trans.github.io/

LLM-based agents for program repair are increasingly built on a "generate-run-revise" paradigm, iteratively executing tests to evaluate and refine patches. This execution-based approach has become standard practice in state-of-the-art systems. However, executions can be time-consuming and expensive, yet their impact on these agents remains underexplored. In this paper, we conduct a two-stage empirical study over execution behavior in LLM-based program repair. To characterize execution behavior at scale, we first analyze 7,745 agent traces from SWE-bench leaderboard submissions. Second, we evaluate 3,000 end-to-end repair attempts across 200 SWE-bench instances and three agents (Claude Code, Codex, and the open-source OpenCode) under four execution paradigms, which allows for a fine-grained comparison of performance and cost. Our analysis reveals three key observations: (1) Code execution is used across all agents and models analyzed, with an average of 8.8 test runs per task. Execution behavior varies substantially across agents and models, with frequency ranging from 2 to 19 per task, and late-stage executions consistently achieve higher success rates than early-stage ones. (2) Execution restrictions have little effect on repair success: on commercial agents with SOTA models the resolve-rate gap between Prohibited and Unrestricted is only 1.25 percentage points and not statistically significant, while Prohibited saves substantial token and wall-clock cost. (3) Execution benefit is concentrated rather than uniform. These patterns suggest that current agents apply execution indiscriminately, paying its cost on instances where it provides little benefit. Execution, therefore, should be treated as a resource with an explicit cost-benefit tradeoff, not a default capability.

Code completion has become an essential tool for daily software development. Existing evaluation benchmarks often employ static methods that do not fully capture the dynamic nature of real-world coding environments and face significant challenges, including limited context length, reliance on superficial evaluation metrics, and potential overfitting to training datasets. In this work, we introduce a novel framework for enhancing code completion in software development through the creation of a repository-level benchmark ExecRepoBench and the instruction corpora Repo-Instruct, aim at improving the functionality of open-source large language models (LLMs) in real-world coding scenarios that involve complex interdependencies across multiple files. ExecRepoBench includes 1.2K samples from active Python repositories. Plus, we present a multi-level grammar-based completion methodology conditioned on the abstract syntax tree to mask code fragments at various logical units (e.g. statements, expressions, and functions). Then, we fine-tune the open-source LLM with 7B parameters on Repo-Instruct to produce a strong code completion baseline model Qwen2.5-Coder-Instruct-C based on the open-source model. Qwen2.5-Coder-Instruct-C is rigorously evaluated against existing benchmarks, including MultiPL-E and ExecRepoBench, which consistently outperforms prior baselines across all programming languages. The deployment of can be used as a high-performance, local service for programming development\url{https://execrepobench.github.io/}.

Large language model (LLM) agents often handle streams of related tasks, yet standard harnesses repeatedly ask the model to reconstruct the same control decisions inside each task's context. We study whether task feedback can instead turn recurring control into reusable executable code, while reserving LLM calls for task-specific semantic reasoning. We introduce Growing Harness, a failure-guided training paradigm that learns the agent harness itself from a strategy-free scaffold that exposes fixed model and tool interfaces but encodes no task-solving controller. Function-level execution traces localize each failure to a bounded code surface, an optimizer repairs a window of failures jointly, and a success-first held-out gate rolls back repair sequences that harm prior capability. Accepted edits accumulate in one shared harness, allowing its control structure to emerge from task feedback. Across BrowseComp-Plus and WebArena-Verified with three deployment models from 4B to 120B parameters, Growing Harness achieves the highest mean success in five of six benchmark-model settings and trails the best mean by 0.7 pp. in the sixth. Relative to a Tool-Calling agent, it reduces LLM calls by 76.0-91.8% and deployed-agent inference cost by 74.4-98.6%. On WebArena-Verified, its success remains 44.7-45.3% across model scales, whereas Tool-Calling falls to 6.7% with the 4B model. Ablations show that trace-local edits, joint repair, and gate-based rollback each improve final success. These results show that persistent program growth can move recurring control out of model context and into low-cost code, yielding reusable specialist agents that remain effective with smaller deployment models.

Malicious Python packages make software supply chains vulnerable by exploiting trust in open-source repositories like Python Package Index (PyPI). Lack of real-time behavioral monitoring makes metadata inspection and static code analysis inadequate against advanced attack strategies such as typosquatting, covert remote access activation, and dynamic payload generation. To address these challenges, we introduce DySec, a machine learning (ML)-based dynamic analysis framework for PyPI that uses eBPF kernel and user-level probes to monitor behaviors during package installation. By capturing 36 real-time features-including system calls, network traffic, resource usage, directory access, and installation patterns-DySec detects threats like typosquatting, covert remote access activation, dynamic payload generation, and multiphase attack malware. We developed a comprehensive dataset of 14,271 Python packages, including 7,127 malicious sample traces, by executing them in a controlled isolated environment. Experimental results demonstrate that DySec achieves a 95.99\% detection accuracy with a latency of <0.5s, reducing false negatives by 78.65\% compared to static analysis and 82.24\% compared to metadata analysis. During the evaluation, DySec flagged 11 packages that PyPI classified as benign. A manual analysis, including installation behavior inspection, confirmed six of them as malicious. These findings were reported to PyPI maintainers, resulting in the removal of four packages. DySec bridges the gap between reactive traditional methods and proactive, scalable threat mitigation in open-source ecosystems by uniquely detecting malicious install-time behaviors.

Current paradigms for code verification rely heavily on external mechanisms-such as execution-based unit tests or auxiliary LLM judges-which are often labor-intensive or limited by the judging model's own capabilities. This raises a fundamental, yet unexplored question: Can an LLM's functional correctness be assessed purely from its internal computational structure? Our primary objective is to investigate whether the model's neural dynamics encode internally decodable signals that are predictive of logical validity during code generation. Inspired by mechanistic interpretability, we propose to treat code verification as a mechanistic diagnostic task, mapping the model's explicit algorithmic trajectory into line-level attribution graphs. By decomposing complex residual flows, we aim to identify the structural signatures that distinguish sound reasoning from logical failure within the model's internal circuits. Analysis across Python, C++, and Java confirms that intrinsic correctness signals are robust across diverse syntaxes. Topological features from these internal graphs predict correctness more reliably than surface heuristics and enable targeted causal interventions to fix erroneous logic. These findings establish internal introspection as a decodable property for verifying generated code. Our code is at https:// github.com/bruno686/CodeCircuit.

This paper presents a novel framework for automated code generation and debugging, designed to improve accuracy, efficiency, and scalability in software development. The proposed system integrates three core components LangGraph, GLM4 Flash, and ChromaDB within a four step iterative workflow to deliver robust performance and seamless functionality. LangGraph serves as a graph-based library for orchestrating tasks, providing precise control and execution while maintaining a unified state object for dynamic updates and consistency. It supports multi-agent, hierarchical, and sequential processes, making it highly adaptable to complex software engineering workflows. GLM4 Flash, a large language model, leverages its advanced capabilities in natural language understanding, contextual reasoning, and multilingual support to generate accurate code snippets based on user prompts. ChromaDB acts as a vector database for semantic search and contextual memory storage, enabling the identification of patterns and the generation of context-aware bug fixes based on historical data. The system operates through a structured four-step process: (1) Code Generation, which translates natural language descriptions into executable code; (2) Code Execution, which validates the code by identifying runtime errors and inconsistencies; (3) Code Repair, which iteratively refines buggy code using ChromaDB's memory capabilities and LangGraph's state tracking; and (4) Code Update, which ensures the code meets functional and performance requirements through iterative modifications.

As multi-agent AI systems are increasingly deployed in real-world settings - from automated customer support to DevOps remediation - failures become harder to diagnose due to cascading effects, hidden dependencies, and long execution traces. We present AgentTrace, a lightweight causal tracing framework for post-hoc failure diagnosis in deployed multi-agent workflows. AgentTrace reconstructs causal graphs from execution logs, traces backward from error manifestations, and ranks candidate root causes using interpretable structural and positional signals - without requiring LLM inference at debugging time. Across a diverse benchmark of multi-agent failure scenarios designed to reflect common deployment patterns, AgentTrace localizes root causes with high accuracy and sub-second latency, significantly outperforming both heuristic and LLM-based baselines. Our results suggest that causal tracing provides a practical foundation for improving the reliability and trustworthiness of agentic systems in the wild.

LLM coding agents are increasingly deployed to act autonomously on real production infrastructure. They execute shell commands, modify repositories, and call operational APIs. However, completing a task is not sufficient for safety. A wrong action can cause severe consequences. Existing agent benchmarks largely emphasize task completion, leaving open how agents behave under benign but underspecified instructions. We present UnderSpecBench, a benchmark for measuring action-boundary violations in coding agents (i.e., Claude Code, Codex, and OpenCode) on DevOps tasks. UnderSpecBench includes 69 task families grounded in documented incidents, CVEs, or tool behavior and organized across four DevOps capability domains and nine operational control surfaces. To isolate underspecification from task difficulty, each task keeps the same environment and ground-truth safe action while varying the instruction along three axes: intent clarity, target certainty, and blast radius. The resulting 2,208 prompt variants are evaluated with deterministic, side-effect-based oracles that separate Safe Success, Wrong Target, and OverScope outcomes; non-action runs are further classified as clarification, refusal, or deferment. Across five agent x model configurations using OpenCode, Claude Code, and Codex, the evaluation results show that underspecification does not mainly make agents fail; it makes them guess. 55.8-67.8% of runs violate at least one boundary. Target underspecification sharply degrades action quality, while blast-radius cues barely reduce action propensity. These findings show that completion-centric evaluation can overstate safe autonomy and motivate mitigations at the model, harness, and system layer.

AI agents increasingly act through external tools: they query databases, execute shell commands, read and write files, and send network requests. Yet in most current agent stacks, model-generated tool calls are handed to the execution layer with no framework-agnostic control point in between. Post-execution observability can record these actions, but it cannot stop them before side effects occur. We present AEGIS, a pre-execution firewall and audit layer for AI agents. AEGIS interposes on the tool-execution path and applies a three-stage pipeline: (i) deep string extraction from tool arguments, (ii) content-first risk scanning, and (iii) composable policy validation. High-risk calls can be held for human approval, and all decisions are recorded in a tamper-evident audit trail based on Ed25519 signatures and SHA-256 hash chaining. In the current implementation, AEGIS supports 14 agent frameworks across Python, JavaScript, and Go with lightweight integration. On a curated suite of 48 attackinstances, AEGIS blocks all attacks in the suite before execution; on 500 benign tool calls, it yields a 1.2% false positive rate; and across 1,000 consecutive interceptions, it adds 8.3 ms median latency. The live demo will show end-to-end interception of benign, malicious, and human-escalated tool calls, allowing attendees to observe real-time blocking, approval workflows, and audit-trail generation. These results suggest that pre-execution mediation for AI agents can be practical, low-overhead, and directly deployable.

Skill-distillation pipelines learn reusable rules from LLM agent trajectories, but they lack a key signal: how much each step costs. Without per-step cost, a pipeline cannot distinguish adding a missing step to fix a bug from removing an expensive step that never affected the outcome. We introduce ClawTrace, an agent tracing platform that records every LLM call, tool use, and sub-agent spawn during an agent session and compiles each session into a TraceCard: a compact YAML summary with per-step USD cost, token counts, and redundancy flags. Built on ClawTrace, CostCraft is a distillation pipeline that reads TraceCards and produces three types of skill patches. Preserve patches keep behaviors that led to success. Prune patches remove expensive steps that did not matter, each backed by a counterfactual argument against a named high-cost step. Repair patches fix failures grounded in oracle evidence. Ablations on 30 held-out SpreadsheetBench tasks show that both cost attribution and prune patches independently reduce quality regressions. When the same skill is applied to 30 unrelated SkillsBench tasks, an unexpected asymmetry emerges: prune rules transferred across benchmarks and cut median cost by 32%, while preserve rules, trained on benchmark-specific conventions, caused regressions on new task types. We release ClawTrace and TraceCards as open infrastructure for cost-aware agent research.

Graphical User Interfaces (GUIs) are central to human-computer interaction, yet automating complex GUI tasks remains a major challenge for autonomous agents, largely due to a lack of scalable, high-quality training data. While recordings of human demonstrations offer a rich data source, they are typically long, unstructured, and lack annotations, making them difficult for agents to learn from.To address this, we introduce ShowUI-Aloha, a comprehensive pipeline that transforms unstructured, in-the-wild human screen recordings from desktop environments into structured, actionable tasks. Our framework includes four key components: A recorder that captures screen video along with precise user interactions like mouse clicks, keystrokes, and scrolls. A learner that semantically interprets these raw interactions and the surrounding visual context, translating them into descriptive natural language captions. A planner that reads the parsed demonstrations, maintains task states, and dynamically formulates the next high-level action plan based on contextual reasoning. An executor that faithfully carries out these action plans at the OS level, performing precise clicks, drags, text inputs, and window operations with safety checks and real-time feedback. Together, these components provide a scalable solution for collecting and parsing real-world human data, demonstrating a viable path toward building general-purpose GUI agents that can learn effectively from simply observing humans.

Long-running LLM agents are stateful: beyond the transcript they accrete compressed summaries, plaintext memory, pending tool plans, and, under every serving API, a KV cache. Yet today's "forget" operations delete a plaintext memory record and stop, leaving every artifact derived from the revoked information intact. We formalize execution-state unlearning: after a forget request, the agent must behave as if it had never observed the target. Modeling the runtime as a deterministic transition system, we prove that the pre-target trajectory prefix is shared with this counterfactual world for free, that the post-target suffix is irreducibly tainted without token-level attribution, and that exact unlearning requires at least T-τ+1 recomputed transitions, where τ is the target's injection step. Provenance-Guided Selective Replay attains this bound as a cross-layer contract spanning prompt, compressed memory, and cache: a provenance graph locates the injection point, checkpoint restoration reduces to cropping the KV cache, and sanitized replay regenerates the counterfactual suffix. Audited with elicitation, stochastic, and string-free behavioral tests across three agent suites, nine baselines, and three model families, memory deletion leaves leakage unchanged, instruction-based forgetting collapses under elicitation (Leak@probes = 1.00), and source redaction still acts on a revoked preference in 80% of episodes, while selective replay is indistinguishable from a full reset at up to 9x fewer recomputed tokens.

Autonomous improvement loops are hard to trust because the improvement process is usually external scaffolding bolted onto the agent: failures go unlogged, diagnoses cannot be replayed, and promote-or-discard decisions land in a side database rather than the agent's own history. We show that an event-sourced agent runtime removes that friction and turns controlled improvement into a first-class workflow. When the agent's state is a deterministic projection of an append-only event log, failures are recorded, a run replays exactly from its log, candidate patches scope to typed pipeline seams, gates are auditable, and every promotion or discard is itself an event. We demonstrate this with Regimes, a loop on the ActiveGraph runtime that diagnoses failed evaluations, proposes a repair at a pipeline point, and promotes it only after static checks, sandbox execution, in-sample evaluation, and held-out validation. The loop is target-agnostic: the same control flow runs against different tasks through a common interface. On LongMemEval-S the dominant failure is not retrieval but reconciliation: the evidence is already in the assembled context, yet the reader answers incorrectly. Across five seeded held-out splits, Regimes discovers reader-prompt repairs that improve final held-out accuracy by +0.05 to +0.10 in four splits and +0.01 in one over-promotion split; two splits are individually significant (seed 5 unadjusted for its sequential promotion structure), and the pooled count is descriptive only, since the splits share one 500-question pool. The durable contributions are ActiveGraph as an auditable substrate that makes controlled improvement loops tractable, the held-out-gated loop it supports, the failure-regime taxonomy routing each failure to a pipeline location (whose marginal value over an unrouted baseline is the primary open question), and the prompt-as-discovery-probe hypothesis.

AI coding assistants now support a growing share of software work, from quick scripts to production applications. Yet these agents remain largely stateless: each new session re-reads project files, re-derives prior decisions, and - most costly - may repeat debugging attempts that already failed. Reconstructing this context can consume an estimated 5,000-20,000 tokens per session; the bottleneck is often not model capability but missing project memory. We present projectmem, an open-source, local-first memory and judgment layer for AI coding agents. projectmem records development as an append-only, plain-text event log of typed events - issues, attempts, fixes, decisions, and notes - and deterministically projects that log into compact, AI-readable summaries served through the Model Context Protocol (MCP). Beyond storage, projectmem adds a deterministic pre-action gate that warns an agent before it repeats a previously failed fix or edits a known-fragile file. We frame this as Memory-as-Governance: memory that does not merely answer the agent but acts on its next action. The system runs fully offline with no telemetry; its immutable log also serves as a provenance trail for reproducible, auditable AI-assisted development. projectmem ships as a three-dependency Python package (14 MCP tools, 19 CLI commands, 37 automated tests) and is evaluated through a two-month self-study across 10 projects comprising 207 logged events. Source code: https://github.com/riponcm/projectmem.

Agentic AI systems act through tools and evolve their behavior over long, stochastic interaction traces. This setting complicates assurance, because behavior depends on nondeterministic environments and probabilistic model outputs. Prior work introduced runtime verification for agentic AI via Dynamic Probabilistic Assurance (DPA), learning an MDP online and model checking quantitative properties. A key limitation is that developers must manually define the state abstraction, which couples verification to application-specific heuristics and increases adoption friction. This paper proposes TriCEGAR, a trace-driven abstraction mechanism that automates state construction from execution logs and supports online construction of an agent behavioral MDP. TriCEGAR represents abstractions as predicate trees learned from traces and refined using counterexamples. We describe a framework-native implementation that (i) captures typed agent lifecycle events, (ii) builds abstractions from traces, (iii) constructs an MDP, and (iv) performs probabilistic model checking to compute bounds such as Pmax(success) and Pmin(failure). We also show how run likelihoods enable anomaly detection as a guardrailing signal.

Language-model agents read attacker-writable context to solve tasks. Tool execution needs a separate authority check for protected sink fields, sink-interpreted payloads, and the invocation event. Context-to-Execution Integrity (CXI) is an execution-boundary system for this setting. Policies mark protected sink fields, typed releases carry narrow validated values from writable context to specific destinations, opaque data slots keep evidence as data, and a deterministic gate admits a call only after field authority, exact-effect authorization, and invocation authority all bind to the same action manifest. We evaluate CXI on open-weight field-projection runs, AgentDojo live episodes, a code-agent exact-effect benchmark, manifest-bound ledger faults, proposal-pressure controls, and hosted/API compatibility traces. AgentDojo covers 720 live episodes and 1,739 LLM calls; the code-agent benchmark covers 400 repository episodes with exact-effect authorization and lease-bound execution, yielding 231 safe task completions and zero observed field, effect, or invocation escapes. The accounting reports parser outcomes, authorization outcomes, and task-quality outcomes together with the admission-integrity result. Across the evaluated sinks, CXI admits execution only when field, effect, and invocation authority bind to the same action manifest.

Training capable OS agents requires data that simultaneously captures structured user intents, multi-turn task delegation, and grounded tool execution--properties absent from existing datasets. We propose ISE (Intent -> Simulate -> Execute), a three-stage synthesis paradigm that addresses these gaps jointly. Stage 1 constructs roughly 50000 structured intents via a 4D framework (Persona x Domain x Task x Complexity); after deduplication the pool contains 43956 unique intents and attains a Vendi Score of 61.57 over the entire pool on mpnet-base-v2 embeddings (cosine kernel, q=1). Stage 2 drives multi-turn user-agent interaction through a role-locked user simulator that grounds each user turn in actual execution outcomes, producing 23132 complete trajectories averaging 8.12 user turns and 68.24 total dialogue turns. Stage 3 runs every tool call inside a live, isolated OS workspace, generating authentic failure-recovery dynamics instead of simulated responses. Fine-tuning on ISETrace improves ClawEval pass@1 from 19.3 to 37.7 using Qwen3-8B on agent tool-use tasks with a standard protocol. This result outperforms zero-shot GPT-4o and the larger Qwen3-32B base model which is four times bigger. An ablation on Stage 2 proves multi-turn simulation brings a large portion of the performance gain. We release all source code and dataset at https://github.com/Valiere01/ISE-Trace.

Many ML-based approaches have been proposed to automatically detect, localize, and repair software vulnerabilities. While ML-based methods are more effective than program analysis-based vulnerability analysis tools, few have been integrated into modern IDEs, hindering practical adoption. To bridge this critical gap, we propose AIBugHunter, a novel ML-based software vulnerability analysis tool for C/C++ languages that is integrated into Visual Studio Code. AIBugHunter helps software developers to achieve real-time vulnerability detection, explanation, and repairs during programming. In particular, AIBugHunter scans through developers' source code to (1) locate vulnerabilities, (2) identify vulnerability types, (3) estimate vulnerability severity, and (4) suggest vulnerability repairs. In this article, we propose a novel multi-objective optimization (MOO)-based vulnerability classification approach and a transformer-based estimation approach to help AIBugHunter accurately identify vulnerability types and estimate severity. Our empirical experiments on a large dataset consisting of 188K+ C/C++ functions confirm that our proposed approaches are more accurate than other state-of-the-art baseline methods for vulnerability classification and estimation. Furthermore, we conduct qualitative evaluations including a survey study and a user study to obtain software practitioners' perceptions of our AIBugHunter tool and assess the impact that AIBugHunter may have on developers' productivity in security aspects. Our survey study shows that our AIBugHunter is perceived as useful where 90% of the participants consider adopting our AIBugHunter. Last but not least, our user study shows that our AIBugHunter could possibly enhance developers' productivity in combating cybersecurity issues during software development.

LLM agents increasingly take on long-running tasks whose history grows far beyond a single model context window. Existing approaches compress earlier interactions or extract selected information into fixed memory representations, committing to what to preserve before future needs are known. We present Scroll, a context manager that treats each agent session as an executable Session Environment. The environment is backed by an append-only Event Log and a sandboxed, persistent Python kernel. The kernel maintains a typed namespace across model calls, allowing tool outputs, retrieved history, and derived state to be bound to variables rather than serialized into the prompt at each call. Model-written code searches, materializes, and transforms session state through exec; only explicitly printed projections enter the model's working view for the next call. Context management thus becomes a programming task that inherits the improving coding abilities of LLMs, while the Event Log preserves lossless historical ground truth. As the working view approaches its budget, stale spans are evicted but remain recoverable: an eviction index keeps compact landmarks tied to exact Event Log addresses, so that the agent navigates directly to evicted regions instead of searching the full log. With Qwen3.8-Max as the backbone, Scroll achieves 94.8% on LongMemEval_S; 73.1% on BEAM_10M, surpassing the best published memory system by 5.1 points; and 86.7% on LOCA_256K, exceeding the best published long-horizon agent by 37.4 points.

Agents often repeatedly solve similar task instances from scratch, leading to unnecessary reasoning cost and long execution traces. Prior work has explored workflow reuse and executable skill induction, but it remains unclear which task scenarios admit procedural skills and how the shared procedural structure should be represented across successful traces. We study this problem in FSM-defined scenarios, where successful traces can be viewed as paths in an unknown transition graph, and formulate procedural skills as reusable parameterized control-flow subgraphs. Based on this view, we introduce SkillDisCo, a distillation-and-compilation framework that distills reusable PFSM subgraphs from successful traces and compiles them into callable, executable, and verifiable procedural skills. Experiments on ALFWorld and WebArena show that SkillDisCo improves success rates and reduces agent turns across benchmarks and model scales, demonstrating the benefits of representing shared experience as reusable execution structures.

A long-horizon agent's trace outgrows both of its consumers: the human observer monitoring the run, and the agent itself, whose bounded context the trace must be folded back into. We present a live trace model, an append-only event ledger folded incrementally into typed run state and compiled into per-consumer views, and evaluate it for both consumers against deterministic ground truth. For the observer side, evaluated with an LLM reader as proxy, the compiled view answers monitoring questions using approximately 14x and 15x fewer input tokens (by reader) and at 5-7x lower cost than a budget-capped single-call reading of the raw trace, with higher accuracy (0.85-0.87 versus 0.48). Because the questions were co-designed with the view schema, we treat the token and cost reduction, conditional on schema coverage, as the transferable result. For the agent, on 120-link sequential-dependency tasks, mechanisms that maintain the task's running statistic in per-step state succeed where full-context prompting fails (30/30 versus 8/30 under a clean protocol, n=30, labeled descriptive owing to benchmark-system co-development); a prompt-level scratchpad matches the fold's accuracy at lower cost, and a two-arm decomposition attributes the fold's accuracy to its deterministic aggregate and its cost advantage to its compactness. The fold's remaining value over cheaper alternatives is deterministic auditability and serving the observer from the same state. We derive eleven candidate requirements for trace folding from observed failures and delimit them with an order-sensitive task family on which the fold ceases to help. Code, benchmarks, a regenerable synthetic corpus, and all workbench traces are released.

LLM agents are increasingly deployed as executable systems that use tools, modify workspaces, and produce concrete artifacts. In such workflows, performance depends not only on the base model, but also on the harness: the system layer that manages context, tools, state, constraints, permissions, tracing, and recovery. However, existing benchmarks typically abstract away execution, compare complete agent systems, or hold the harness fixed, making execution-layer variation difficult to study. We introduce Harness-Bench, a diagnostic benchmark for evaluating configuration-level harness effects in realistic agent workflows. Harness-Bench evaluates representative harness configurations across multiple model backends under shared task environments, budgets, and evaluation protocols, while preserving each harness's native execution behavior. The benchmark contains 106 sandboxed offline tasks constructed from practical agent-use patterns and manually reviewed for realism, solvability, oracle-checkability, and integrity. Each run records final artifacts, execution traces, usage statistics, and validator outputs, enabling analysis beyond final completion. Across 5,194 execution trajectories, we observe substantial variation in completion, process quality, efficiency, and failure behavior across model-harness pairings. These results suggest that agent capability should be reported at the model-harness configuration level rather than attributed to the base model alone. Our analysis further identifies recurring execution-alignment failures, where plausible reasoning becomes decoupled from tool feedback, workspace state, evidence, or verifiable output contracts. Harness-Bench provides a reproducible foundation for diagnosing and improving reliable, efficient, and auditable agent execution stacks.

We study a class of optimization problems motivated by automating the design and update of AI systems like coding assistants, robots, and copilots. We propose an end-to-end optimization framework, Trace, which treats the computational workflow of an AI system as a graph akin to neural networks, based on a generalization of back-propagation. Optimization of computational workflows often involves rich feedback (e.g. console output or user's responses), heterogeneous parameters (e.g. prompts, hyper-parameters, codes), and intricate objectives (beyond maximizing a score). Moreover, its computation graph can change dynamically with the inputs and parameters. We frame a new mathematical setup of iterative optimization, Optimization with Trace Oracle (OPTO), to capture and abstract these properties so as to design optimizers that work across many domains. In OPTO, an optimizer receives an execution trace along with feedback on the computed output and updates parameters iteratively. Trace is the tool to implement OPTO in practice. Trace has a Python interface that efficiently converts a computational workflow into an OPTO instance using a PyTorch-like interface. Using Trace, we develop a general-purpose LLM-based optimizer called OptoPrime that can effectively solve OPTO problems. In empirical studies, we find that OptoPrime is capable of first-order numerical optimization, prompt optimization, hyper-parameter tuning, robot controller design, code debugging, etc., and is often competitive with specialized optimizers for each domain. We believe that Trace, OptoPrime and the OPTO framework will enable the next generation of interactive agents that automatically adapt using various kinds of feedback. Website: https://microsoft.github.io/Trace

Applied Behavior Analysis (ABA) is a clinical discipline whose documentation, teaching programs and multi-session behavioral logs, is formulaic and high-volume, yet real session data is HIPAA-protected and bound by professional confidentiality rules, blocking the release of a training corpus. We present TRACE (Taxonomy-Referenced ABA Clinical Examples), a 2,999-example synthetic instruction-tuning dataset covering two ABA tasks: teaching-program generation across Discrete Trial Training, Natural Environment Teaching, and Task Analysis; and multi-session behavioral interpretation across twelve trajectory patterns and thirteen target behaviors. Every example is produced by a deterministic taxonomy-driven generator grounded in the canonical ABA literature, and every example carries complete sampling provenance, the exact taxonomy cells that produced it. The dataset is released under CC BY-NC 4.0 for data and MIT for code, with stratified train (2,549), validation (149), test (281), and sanity (20) splits. TRACE is a research artifact and has not been clinically validated.

Prompt injection was initially framed as the large language model (LLM) analogue of SQL injection. However, over the past three years, attacks labeled as prompt injection have evolved from isolated input-manipulation exploits into multistep attack mechanisms that resemble malware. In this paper, we argue that prompt injections evolved into promptware, a new class of malware execution mechanism triggered through prompts engineered to exploit an application's LLM. We introduce a seven-stage promptware kill chain: Initial Access (prompt injection), Privilege Escalation (jailbreaking), Reconnaissance, Persistence (memory and retrieval poisoning), Command and Control, Lateral Movement, and Actions on Objective. We analyze thirty-six prominent studies and real-world incidents affecting production LLM systems and show that at least twenty-one documented attacks that traverse four or more stages of this kill chain, demonstrating that the threat model is not merely theoretical. We discuss the need for a defense-in-depth approach that addresses all stages of the promptware life cycle and review relevant countermeasures for each step. By moving the conversation from prompt injection to a promptware kill chain, our work provides analytical clarity, enables structured risk assessment, and lays a foundation for systematic security engineering of LLM-based systems.

AI agent frameworks connecting large language model (LLM) reasoning to host execution surfaces--shell, filesystem, containers, and messaging--introduce security challenges structurally distinct from conventional software. We present a systematic taxonomy of 190 advisories filed against OpenClaw, an open-source AI agent runtime, organized by architectural layer and trust-violation type. Vulnerabilities cluster along two orthogonal axes: (1) the system axis, reflecting the architectural layer (exec policy, gateway, channel, sandbox, browser, plugin, agent/prompt); and (2) the attack axis, reflecting adversarial techniques (identity spoofing, policy bypass, cross-layer composition, prompt injection, supply-chain escalation). Patch-differential evidence yields three principal findings. First, three Moderate- or High-severity advisories in the Gateway and Node-Host subsystems compose into a complete unauthenticated remote code execution (RCE) path--spanning delivery, exploitation, and command-and-control--from an LLM tool call to the host process. Second, the exec allowlist, the primary command-filtering mechanism, relies on a closed-world assumption that command identity is recoverable via lexical parsing. This is invalidated by shell line continuation, busybox multiplexing, and GNU option abbreviation. Third, a malicious skill distributed via the plugin channel executed a two-stage dropper within the LLM context, bypassing the exec pipeline and demonstrating that the skill distribution surface lacks runtime policy enforcement. The dominant structural weakness is per-layer trust enforcement rather than unified policy boundaries, making cross-layer attacks resilient to local remediation.

Computer-use agents provide a promising path toward general software automation because they can interact directly with arbitrary graphical user interfaces instead of relying on brittle, application-specific integrations. Despite recent advances in benchmark performance, strong computer-use agents remain expensive and slow in practice, since most systems invoke large multimodal models at nearly every interaction step. We argue that this uniform allocation of compute is fundamentally inefficient for long-horizon GUI tasks. Such trajectories are highly heterogeneous: many steps are routine and can be handled reliably by smaller, cheaper policies, while errors tend to concentrate at a relatively small number of high-risk moments. Across computer-use benchmarks, these failures repeatedly take two forms: progress stalls, where the agent loops, repeats ineffective actions, or fails to make meaningful progress, and silent semantic drift, where the agent continues taking locally plausible actions after already deviating from the user's true goal. To address this inefficiency, we propose an event-driven, step-level cascade for computer-use agents that runs a small policy by default and escalates to a stronger model only when lightweight learned monitors detect elevated risk. Our framework combines two complementary signals: a Stuck Monitor that detects degraded progress from recent reasoning-action history and triggers recovery, and a Milestone Monitor that identifies semantically meaningful checkpoints where sparse verification is most informative for catching drift. This design turns always-on frontier-model inference into adaptive, on-demand compute allocation over the course of an evolving interaction. The framework is modular and deployment-oriented: it can be layered on top of existing computer-use agents without changing the underlying agent architecture or retraining the large model.